QSP LM-200 Manual

11515 Adie Rd. Maryland Heights MO 63042
_____________________________________________________________________________
LM-200 Warranty
The LM-200 has been thoroughly tested and is guaranteed for a period of 12 months from the date of
delivery. Under the terms of this guarantee all components which are proven defective within the
warranty period will be repaired or replaced free of charge. Our technical assistance service is the
sole authority in determining whether or not defects come under the coverage of the guarantee. The
guarantee excludes all responsibility on the part of the Quality Stainless Products for direct or
indirect loss or damage to persons or things deriving from incorrect operation or servicing of the
product. The guarantee is limited to defects in materials, workmanship and assembly, and excludes
all components subject to normal wear. Furthermore, the guarantee excludes return shipping of
defective part to QSP. We will however ship the replacement part by standard ground service at no
charge.
Parts Department 888-473-5378
TYPE: Tire and Wheel lift
MODEL: LM-200
_________________________________________________________________________________
OPERATION INSTRUCTIONS
Removing the Tire and Wheel Assembly from a vehicle using The LM-200
1. Attach air to LM-200
2. Position LM-200 under tire and wheel on the vehicle and raise lifting fork by pressing the
control lever upward. The control valve is variable speed. The further away from center the
lever is moved, the faster the lifting fork will move.
3. Once the rollers have made contact with the bottom of the tire, release the control lever.
4. Remove lugs & pull the top of the tire toward you and disengage wheel from the vehicle.
5. With the tire on the rollers back the lift away from the vehicle and lower the lifting fork.
6. With the tire & wheel assembly resting on the ground, roll the LM-200 away from assembly.
It is not necessary to lift the tire & wheel assembly off of the LM-200.
Installing the Tire and Wheel Assembly on a vehicle using the LM-200
1. With the tire & wheel assembly on the ground, position the LM-200 so that the forks are
beneath the assembly.
2. Press up on the control lever to raise the lifting fork up to the proper installation height.
3. Rotate the tire and wheel on the rollers to align lug studs to the wheel.
4. Slowly raise or lower to exact position and push the top of the tire and wheel assembly
forward to engage the stud and lug nut holes.
5. Install lug nuts and lower lifting fork.
6. Move LM-200 from beneath vehicle before lowering lift to avoid damaging product.
Please retain this document for reference when calling Technical Assistance.
Serial Number:
______________________________________
Supply air 70-120psi at 20-30cfm
Phone (888) 473-5378
Local Phone (314) 699-9613
Fax: (314) 699-9617
Website: http://qsponline.com