Minder Research TempMinder MRI-822MX Manual

Congratulations on having purchased (or received) this fine MRI-822MX TempMinder®. If you have any questions or
concerns, feel free to contact us at any time (information below). These instructions are purposely non-technical
(written by Minder's "non-engineering" staff members only).
1. Read below "Know your controls," insert the batteries – ENJOY!
2. Keep the instructions, you will need them to set HI/LO alerts and clear min/max memory.
 KNOW YOUR TempMinder® MRI-822MX CONTROLS!!!
Receiver Rear
"IN" press to display indoor information
"CH" press to change channels. Press and hold (2 seconds) to clear remote info and force a new search
"MEM" used to review and clear temperature and humidity Minimum & Maximum history
"UP" use when setting Hi/Lo temperature alert levels
"ALARM ON/OFF" Turns the Temperature alerts on or off (HI/LO visible or not)
"HI/LO" Use to set the upper or lower temperature alerts for each channel
"C/F" Hopefully no explanation required!!!
"LIGHT" activates really cool blue backlight for 10 seconds
Functions:


Large easy to read display

Receive remote temp and humidity from up to 3 locations w/trend arrow (extra RS-MX (RS211/213)
transmitters sold separately)

One RS-MX (RS211/213) remote transmitter included

Indoor temperature & Humidity (°C or °F) w/trend arrows

Three humidity comfort level icons

HI/LO programmable temperature and/or humidity alerts on all 3 remote channels.

Min/Max temp/humidity memory

Low battery indicator

Ultra BLUE LED backlight
 Specifications:
- Remote Temperature Range:
- Remote transmission Distance:
- Temperature Accuracy:
- Humidity Accuracy:
- Humidity Range:
- Power Supply:
-30°C to + 60°C (-22°F to +140°F)
Max 130 meters (426 ft)
+/- 1.5°C (2.5°F)
+/- 5%
20% to 95%
4 "AAA" batteries (not incl.)