Page 2
STEP 1 – Connect the Main Studio console audio output (such as Program, or Monitor output) to the audio Main input on the ARC-HP. The Main input is a balanced input that uses pins 1, 2, 3, and 6. MAIN PORT PINOUT...
Page 3
STEP 8 (OPTIONAL) – Connect output pins 3 & 6 of the Control I/O to your Main Studio console mic input. This allows the user to press the Cough button on the front of the ARC-HP, which will mute the mic audio. The switch is momentary, so press to cough, and then let go to restore mic audio.
Page 4
Connect Pin 2 on the ARC-HP to the Main Studio's Talkback output. The ARC-10 series uses the DB15 connector pin12 as it's Talkback audio output(check ARC-10 manual for current information).