Page 1
4’, 5’ GLIDER EASY ASSEMBLY INSTRUCTIONS Step 1 (Attach arms to seat) Align the front bolt holes. Insert a short bolt and washer through the upper hole on the front of the arm brace and into the seat and tighten. Only finger tight. Once fully assembled tighten everything up.
Page 2
4’, 5’ GLIDER CONT. Step 2 (Attach backrest to chair) Align the holes midway up the backrest with the holes on the back of the arms. For both sides, insert a bolt into the washer, arms and back then slide on another washer to each and tighten nuts onto the bolts.
Page 3
4’, 5’ GLIDER CONT. Step 3 (Attach chair to base) The front hangers on the base are 1” shorter than the back. With the front facing forward, slide the base under the chair. Use the bolt and washer and put it through the back, lower hole of the arm frame into the back hanger.