Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ceice TS-1032
Summary of Contents for Ceice TS-1032
- Page 1 TS-1032 automatic soft ice cream machine Instructions for use...
-
Page 2: Technical Parameters
"Shanghai Esse" and Esse are Shanghai Food Co., Ltd. registered trademark without permission are not allowed to misappropriation. Technical Parameters TS-1032 Device Model Rated Power Single-phase 220V 50Hz... -
Page 3: Safety Precautions
Safety Precautions Before you start using a soft ice cream machine, make sure the following safety precautions • The machine should be placed on a firm and stable level desktop Doing so may cause noise, vibration and wear, even dumping of hazardous •... - Page 4 Precautions In order to make better use of the machine, observe the following during use • This equipment is specialized in the production of soft ice cream machine, to use raw or soft ice cream soft ice cream powder mix formulated for production, not for frozen drinks and slush When using the soft ice cream powder, cream powder please per 1 kg against 2.7 liters of pure water formulated feed.
- Page 5 Each valve member and the mounting relationship of the agitator shaft assembly • When the valve is assembled, as shown in FIG direction charged parts • When the plunger is inserted, the metal rod so that the upper end of the head is flush with the valve body If not aligned, the valve assembly can not be installed on the machine, it may result in failure of the plunger lifter •...
- Page 6 Expanded tube assembly • Extruded expanded tube assembly of tubes and hoses two component parts silica After the damaged hose ends, please cut use, replace the hose if necessary Containing attachment for cleaning the bore and the expanded silicone hose brush tube, and a spare seals and hoses, Keep •...
- Page 7 • Attention to the direction the cartridge is placed dropwise • When closing the rocker arm assembly and confirm locked, open the press and pull the switch • The mask in the holder, and rotation of the valve body conforming to •...
- Page 8 Start making ice cream Stirring shaft, the valve body assembly and extruded pipe after installation, may be added to the raw material When using the soft ice cream powder, cream powder please per 1 kg against 2.7 liters of pure water formulated feed. Prior to joining the ratio of raw materials, please check again 1.
-
Page 9: Washing Machine
Standby preservation This machine has a standby preservation of function, every day without washing, please wash cycle in accordance with the washing machine if not the same day cleaning operation, be sure to follow the following When using the standby mode, make sure the machine's power supply is not interrupted 1. - Page 10 The method of operation to ensure the quality of ice cream Expansion rate has a direct impact on the taste, shape and cost control, good puffing effect is soft ice cream quality foundation. In order to best reflect the flavor of raw materials, access to more customers, please read the following operating instructions •...
-
Page 11: Frequently Asked Questions
Frequently Asked Questions • Why there is raw material tank, a screen prompt is still lack of material? When the remaining raw materials of less than about 1L-cylinder machine prompts lack of material. If the business at this time is not over yet, please timely feed After remaining raw material shortage tips can make 10 copies of ice cream, then if there is no supplementary material, the machine will be forced to stop selling •... - Page 12 Hardness parameters The default value is 2.3, for adjusting the hardness of the ice cream Pump run time - The default value is 1.6 seconds - by default Low-voltage protection System Password Editing Device Management passwords Splice number of steps Only operate under the guidance of professionals Splice start waiting time Only operate under the guidance of professionals...