Table of Contents
Advertisement
6. ISR
• Warning message
[Video/Audio Block warning]
Message
NO SDI INPUT
EDH FULL FIELD CRC ERROR
[Audio Block warning]
Message
SDI AUDIO CH* INPUT DATA ERROR
[Other warning]
Message
TEST MODE ACTIVE BY DIP SWITCH
• Operation status
Message
Status Display
VIDEO INPUT
SDI SIGNAL
100% COLOR-BAR TEST SIGNAL
75% COLOR-BAR TEST SIGNAL
MULTI BURST TEST SIGNAL
BLACK TEST SIGNAL
AUDIO CH* INPUT
SDI SIGNAL
AES SIGNAL
1 kHz TEST SIGNAL
SILENCE TEST SIGNAL
REF LOCK MODE
INPUT
REF
VIDEO GOP LENGTH
1 FRAME
2 FRAME
VIDEO BRR BIT RATE
[• • •] Mbps
1-12 (E)
Description
Indicates that no signal is input or the input signal is not judged to be
contained in SDI INPUT connector
The error is detected in the EDH full field CRC check when SDI signal
with EDH is input in SDI INPUT connector
Description
The error is detected in channel No.* of SDI audio input signal when
SDI AUDIO input has been selected
Description
The test mode is active (S3000-8 is set to ON)
Description
Indicates the setting of the input video signal
Indicates the setting of the input audio signal
Indicates the setting of the REFERENCE signal of
the encoder
Indicates the size of the GOP of the video signal
Indicates the setting of the bit rate of the video
signal
BKSI-2020
Advertisement
Table of Contents
