Download Print this page

Seating Matters DENVER Operation Manual & Product Specification

Hide thumbs Also See for DENVER:

Advertisement

Quick Links

DENVER
Operation Manual &
Product Specification

Advertisement

loading
Need help?

Need help?

Do you have a question about the DENVER and is the answer not in the manual?

Questions and answers

Summary of Contents for Seating Matters DENVER

  • Page 1 DENVER ™ Operation Manual & Product Specification...
  • Page 2 November 2019...
  • Page 3: Table Of Contents

    CONTENTS Safety Instructions Technical Specification User Guide and Operating Instructions Working Environment Seating Matters Recycling Policy Intellectual Property Maintenance and Servicing DENVER ™ Instruction Manual...
  • Page 4: Safety Instructions

    2. The User must ensure that the product is in good condition before use (check all nuts and bolts are fastened, fabric in good condition etc). If there are any problems, these must be reported to your Seating Matters provider and corrected before the chair is put into use.
  • Page 5 9. Ensure there is more than one competent person there when making adjustments to ensure they are correct and safe for the Patient. 10. If in doubt as to any the adjustments, feel free to contact Seating Matters direct at technical@seatingmatters.com.
  • Page 6: Technical Specification

    DENVER Basic dimensions TECHNICAL SPECIFICATION Overall height 1090mm/43in Back height 690mm/27in Seat to floor height 400-500mm/16-20in Inside back width 495-595mm/20-24in Chair and overall length E (Seat width) F (Overall widths) 450mm/18in 700mm/28in 500mm/20in 750mm/30in 550mm/22in 800mm/32in Seat depth back position...
  • Page 7: User Guide And Operating Instructions

    Please call your Seating Matters provider if you have any questions on these points. This product should not be lifted at any time unless by competent persons trained in such manual handling.
  • Page 8 • Seat depth adjustment: To adjust the seat depth on the DENVER™ stand at the back of the chair and lift the lock levers at the base of the backrest. Lift the back from it's hinges. The standard setting for seat depth is set to Position A. and place it on depending on settings (fig.
  • Page 9 Side laterals can be purchased seperately as additional side support to the DENVER™. To add or remove side laterals, insert the end (no padded side) of the lateral into the mounted bracket on the backrest and tighten the knobs. (Figure 3.b).
  • Page 10 • Stand transfers: Ensure transfer area is clear of hazards before allowing the patient to get on or off the chair exercising care to stay away from the sliding rail. Ensure the braking castors are engaged for stability and safety. The back recline and seat angle must be in a safe position before the Patient can perform the stand transfer or engage the Rise function.
  • Page 11 9V batteries located in the control box for backup power. They are not meant to be used for a prolonged period and the chair will operate slower when powered soley by internal batteries. (fig.4) DENVER ™ Instruction Manual...
  • Page 12: Working Environment

    WORKING ENVIRONMENT Dartex Multi-stretch: Waterproof, stain resistant, flame retardant, multidirectional • stretch fabric for pressure management situations – i.e. seat cushion, calf panels, lateral supports and seat back. • Vinyl: Non-absorbent, anti-bacterial, flame retardant, strong, durable material for outer arms, outside back etc. Cleaning and Maintenance of Fabrics •...
  • Page 13: Seating Matters Recycling Policy

    • Contact your local authority or governmental agency for the regulations that apply in your area. • If you wish to have Seating Matters recycle your product and your behalf, you are welcome to return the product to our company.
  • Page 14: Intellectual Property

    INTELLECTUAL PROPERTY Seating Matters are at the forefront of seating research and design, therefore we take the protection of our intellectual property very seriously and have our designs, patents and trademarks protected in many jurisdictions throughout the world.
  • Page 15 • Frame: Check the visible parts of the frame for cracks, splits, large dents or other damage. If you find any of these things do not use. Contact your Seating Matters approved provider immediately. WE ARE HERE TO HELP For any questions or queries regarding your Seating Matters chair please contact: contact@seatingmatters.com...
  • Page 17 WE ARE HERE TO HELP For any questions or queries regarding your Seating Matters chair please contact: contact@seatingmatters.com...
  • Page 18 VIEW OUR FULL RANGE OF CHAIRS & ACCESSORIES ONLINE. WWW.SEATINGMATTERS.COM...
  • Page 20 Australia Canada N.Ireland & ROI 1/6 St James Place 269 Maplegrove Rd 131 Carnamuff Road Seven Hills, Colborne Limavady NSW 2147 ON, Canada Northern Ireland Australia K0K 1S0 BT49 9JG Tel: +61 1300 001 050 Tel: +1 (905) 507 9007 Tel: +44 (0) 28 777 666 24 australia@seatingmatters.com...