Table of Contents
Advertisement
Quick Links
ET6795
1,200A Peak CCA Jump Starter | Power Bank
Instruction Manual
Read all safety warnings and instructions. Failure to follow warnings and
instructions may result in electric shock, fire, and / or serious injury.
FOR 12V AUTOMOTIVE BATTERIES ONLY
READ THIS MANUAL CAREFULLY BEFORE USE | SAVE THESE INSTRUCTIONS
VER 1015-30AA
Advertisement
Table of Contents
Summary of Contents for ENDEAVOUR ET6795
- Page 1 ET6795 1,200A Peak CCA Jump Starter | Power Bank Instruction Manual Read all safety warnings and instructions. Failure to follow warnings and instructions may result in electric shock, fire, and / or serious injury. FOR 12V AUTOMOTIVE BATTERIES ONLY READ THIS MANUAL CAREFULLY BEFORE USE | SAVE THESE INSTRUCTIONS...
- Page 2 SAFETY WARNINGS Use only the 240V adaptor supplied with this unit. Do not modify this adaptor in any way. ■ Do not expose this unit to rain or wet conditions. Water entering this unit risks electric ■ shock. If use in a damp location is unavoidable, use a residual current device (RCD) protected supply.
- Page 3 PRODUCT OVERVIEW 1 2 3 ON/OFF button USB output Positive (red) DC15V input 1W LED light DC12~16V output Manual Activation/ Reset Button Battery indicator EC5 output/Dust cover Indicator light Negative (black)
- Page 4 ■ You must NOT attempt to jump start vehicles with a higher battery rating, or different voltage. Use the supplied SMART START cable ONLY with this ET6795 jump starter. Do NOT connect this ■ SMART START cable to any other jump starters. Do NOT connect this Smart Start cable to any battery with a voltage greater than 15V.
- Page 5 A. Make sure that the jump start unit has two or more power indicator lights on (to ensure it has sufficient charge to jump start the vehicle). If the jump start capacity is too low when you connect the SMART START cable, the indicator light will flash red. Recharge the unit. B.
- Page 6 MANUAL ACTIVATION / RESET BUTTON The SMART START cable provides important safety protections. These include short circuit protection, reverse charging protection and reverse polarity protection. In addition, the SMART CABLE will automatically disconnect (and indicator light will flash green): After five (5) jump start attempts; ■...
- Page 7 MOBILE PHONE / TABLET / PC CHARGING A series of charging adaptors are supplied with this unit. However, we recommend using the charging cable supplied with your original product. For phones / tablets, plug the USB port of the charging cable into the USB 5V output port, and the adaptor to your device.
- Page 8 C. Endeavour Tools may replace or repair the defective good (or part thereof ) or refund the purchase price of the defective good at its option. D. Endeavour Tools shall not be responsible for any loss or damage arising from or in any way connected with the use of the goods.
Need help?
Do you have a question about the ET6795 and is the answer not in the manual?
Questions and answers