EMPIRE ER3 OPERATOR’S MANUAL TABLE OF CONTENTS Empire reserves the right to modify or change its markers without incurring any obligation to incorporate PAINTBALL BASIC SAFETY RULES ................4 such modifications or changes in any of its products that were sold prior to the modification. The information in this operator’s manual may be updated or changed without notice.
W A R N I N G • Markers with regulators hold pressure even after tank is removed. Shoot marker in a safe THE ER3 PAINTBALL MARKER IS NOT A TOY. MISUSE MAY CAUSE SERIOUS INJURY OR direction after tank is removed to de-gas it completely.
OPERATION • Carry marker in case or sturdy bag when in public. Every person within range of an area where a paintball marker is in use must wear protective • Safely and securely store marker to prevent access to it by unauthorized persons. goggles and headgear specifically designed for paintball when operating the marker.
W A R N I N G will bobble some, but they will not come out all the way. The ER3 marker shoots one paintball for each squeeze of the trigger, and re-cocks itself All paintball markers must be chronographed regularly. Adjust marker to shoot paintballs after each shot.
DISASSEMBLY LUBRICATION The ER3 is easy to strip for cleaning and basic maintenance. Regular cleaning and It is recommended that 100% synthetic paintball marker oil be used for lubricating the maintenance is highly recommended. Keep screws tightened. Replace worn components marker.
Page 8
See Figures 19-20. 4. The fastest way to oil the entire ER3 is to take off the barrel; put 6 drops of oil into the 2. Before it stops sliding forward, push the Sear Release Slide button forward. The Sear...
Page 9
(#14) under the receiver. One is in front of the trigger guard and one is behind the grip portion of the frame. See Figure 26. The receiver then will disassemble from the trigger DO NOT ATTEMPT TO COMPLETELY DISASSEMBLE YOUR ER3 UNLESS QUALIFIED frame.
BARREL OF ANY PAINTBALL MARKER ONCE THE BARREL IS SCREWED INTO THE MARKER. Questions about your ER3 purchase, the operation of the marker, or any updates may be directed to: THE PAINTBALL MARKER AIR SYSTEM MUST BE REPAIRED OR REPLACED WITH THE CORRECT PRESSURE RATED COMPONENTS.
Page 11
Two paintballs shoot at a time Check ball detent (#5) and replace if necessary Check that air source is adequately filled SHOOT ONLY QUALITY EMPIRE OR JT PAINTBALLS FOR BEST RESULTS WHEN USING THE EMPIRE ER3 MARKER. Adjust velocity adjuster clockwise...
This Empire ER3 semi-automatic paintball marker is surrendered by Empire, with the express arise from the use or operation of the ER3 or from any breach of the warranty herein set understanding that the purchaser assumes all liability arising out of any unsafe handling of this forth.
Page 13
Printed in Taiwan W A R N I N G THE ER3 PAINTBALL MARKER IS NOT A TOY. MISUSE MAY CAUSE SERIOUS INJURY OR DEATH. EYE PROTECTION DESIGNED FOR PAINTBALL USE MUST BE WORN BY THE USER AND ANY PERSON WITHIN RANGE. READ THIS OPERATOR’S MANUAL COMPLETELY BEFORE LOADING, PRESSURIZING, OR OPERATING THE ER3 PAINTBALL MARKER.
Page 14
RAZZOR BARREL -200 Plus Ball Capacity. -Extended Battery Life. -Three in one barrel system. -3 Speed Variable Feed Rate. -Fits M98, Piranha/ER3/Spyder, & BT-4/A-5. -Uses One 9v Battery. -Spiral porting for ultra quiet shooting -Sound Activated. -Black gloss finish 21429...
Need help?
Do you have a question about the ER3 and is the answer not in the manual?
Questions and answers