Powering On/Off; Call Functions; Make A Call; Answer The Call - Blaupunkt DT 01 User Manual

EN

5. Powering On/Off

1. Press and hold down the power key until the display logo lights
2.If you require a PIN code after power on, enter the correct PIN. If you enter the wrong
number, press the right soft key to delete the number.
3. To turn off the phone, press and hold the power key until the screen turns off

6. Call functions

6.1 Make a call

1. When the phone in standby mode, dial the number you want to call using the
alphanumeric keypad
2. If you have input a wrong number, press the Right soft key to delete the last number or
press and hold the Right soft key to delete all number
3. Press the Dial key to dial the number. If the number is in the phone book, the contact
name appears on the screen.
4.Press Power on/off/ END key to end the call

6.2 Answer the call

When you receive a call, the phone rings, the display shows the number or contact name (if
stored in the phone book):
Pick up the receiver or press Call key to answer the call.

6.3 Making emergency calls

You can make emergency calls even you have not registered to the local network or do not
have SIM card. Enter local emergency number and then press Dial key to make an
emergency call.

6.4 Functions available during a call

Some operations and services are available during an active call. Many of these depend
on network support, please check with your network service provider for these options.
Press the left soft key [Options] to access the call during the active call in the menu,
9