Advertisement
Table of Contents
KID'S BIKES
1-SPEED
COASTER
ASSEMBLY GUIDE
Illustrations are based off of Roadster Classic but instructions apply to all of these models:
Lil' Roadster 16"/20" | Lil' Dutchi 16"/20" | Linus Balance
Please review Assembly Guide in its entirety before beginning bicycle assembly. If you do not feel fully
capable of assembly or do not have the proper tools please contact your local bicycle shop to assemble.
Advertisement
Table of Contents
Related Manuals for Linus Lil’ Roadster 20"
Summary of Contents for Linus Lil’ Roadster 20"
- Page 1 Illustrations are based off of Roadster Classic but instructions apply to all of these models: Lil’ Roadster 16”/20” | Lil’ Dutchi 16”/20” | Linus Balance Please review Assembly Guide in its entirety before beginning bicycle assembly. If you do not feel fully...
- Page 2 Required Tools (not included) SCISSORS PHILIPS HEAD WRENCH ALLEN WRENCH TORQUE LUBRICATING SCREWDRIVER 15MM, 14MM, 13MM, 12MM, 10MM 6MM, 5MM, 4MM WRENCH** GREASE* Parts (included) PEDALS BELL REFLECTORS Unpacking * Available at auto parts, hardware, or bicycle stores. ** Failure to tighten bolts to the required torque specifications can lead to Open top of the bicycle box.
- Page 3 Training Wheel Parts (only included with 16” bike models) LOCKING NUTS WASHERS TRAINING WHEEL ALIGNMENT TAB ALIGNMENT TAB BOLTS (DRIVE-SIDE) (NON DRIVE-SIDE) TRAINING WHEEL BRACKETS TRAINING WHEELS...
- Page 4 1. Stem Installation 1.1 Apply a small amount of grease around the bottom 1.5” (35mm) of the stem (A). Insert stem into the steerer tube so that the minimum insertion line (B) is not visible. Tighten with the 6mm Allen wrench (C). Torque Requirement: 20-23Nm.
- Page 5 4. Front Wheel Installation 4.1 Use 15mm wrench to loosen the nuts on the front wheel enough to slide the axle (A) into the fork dropouts (B). Make sure to seat the axle completely in the dropouts. Insert bent tab of axle washer (C) into small hole at the top of the dropouts.
- Page 6 6. Pedal Installation; READ FIRST! (POTENTIAL FOR DAMAGE IF INSTALLED INCORRECTLY!) 6.1 Pedals are side-specific. Check the ends of the axles (A) to identify which side of the bicycle to install them in. R = Side of bicycle with chain. Apply a small amount of grease to the pedal threads.
- Page 7 10.1 9. Tire Inflation Tire information can be found on the side-walls of your tires – you should be able to see tire size (e.g. 16x1.50) and recommended inflation (e.g. 40-65 PSI). Tire pressure should be checked before each ride to help prevent unnecessary flats.
- Page 8 30-45Nm. stem and tighten the bolt to spec. General Handlebar Test ride your Linus to ensure that Looking at the handlebars from the the hub is shifting correctly, that side, ensure that they are level with the the brakes are engaging quickly ground.
Need help?
Do you have a question about the Lil’ Roadster 20" and is the answer not in the manual?
Questions and answers