The frequency stability for both 2.4 GHz (802.11b and 802.11g) and 5 GHz (802.11a) operation is +/- 20 ppm. The SDC-CF22AG is powered by the host device into which it is installed and uses a DC to DC regulator. The SDC-CF22AG incorporates four separate antenna “chip” elements to provide an omnidirectional coverage pattern and to support dual band transmit and receive diversity.
EGULATORY Antenna Specifications The SDC-CF22AG incorporates an integrated dual band antenna that supports transmit and receive diversity: Type: Dipole Maximum 2.4 GHz Gain: 0 dBi...
Antenna Patterns Documentation Requirements In order to maintain regulatory compliance, when integrating the SDC-CF22AG into a host device and leveraging Summit’s grants and certifications, it is necessary to meet the documentation requirements set forth by the applicable regulatory agencies. The following sections (FCC, Industry Canada, and European Union) outline the information that must be included in the user’s guide for the host devices into which the...
Page 14
(including the transmitter) and obtaining a separate FCC authorization. When using Summit’s FCC grant for the SDC-CF22AG, the integrator must include specific information in the user’s guide for the device into which the SDC-CF22AG is integrated. The integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the...
RF module in the user’s manual of the device into which the SDC-CF22AG is integrated. . In addition to the required FCC statements outlined above, the following IC statements must be added in their entirety and without modification into a prominent place in the user’s guide for the device into which the SDC-CF22AG is integrated:...