Stansport OUTFITTER Series Instructions

MINIMUM CLEARANCE
TO FLAMMABLES OR
COMBUSTIBLES IS 25"
Windshield
Burner assembly
Grid
Case assembly
Propane gas is highly flammable and under pressure in the cylinder. Do Not store or use gasoline or other flammable
liquids or vapors in the vicinity of this stove. If you detect the odor of gas, immediately evacuate the enclosed area
and contact the appropriate authorities/professionals.
SET UP/ OPERATING/ STORAGE INSTRUCTIONS
PREPARING THE STOVE
1. Place the stove on a flat, level, sturdy surface.
2. Open the lid and align the holes in the windshield with tabs on inside of lid, snap into place.
3. Make sure burners are in the off position.
4. Push regulator assembly firmly into stove. Tighten nut securely.
5. Screw propane cylinder into the regulator.
OPERATING THE STOVE
1. Turn the burner valve on and press the red igniter button until the burner lights.
2. Adjust the flame to the desired height. Flame should be compact and blue in color.
3. Avoid getting dirt into valves, regulator, and burners.
4. To shut burner off, turn the valve to off. (clockwise).
CLEANING YOUR STOVE
1. Allow the grate and burner to cool.
2. Remove grate from the stove.
3. Wash drip pan and grate with soapy cloth. Do not use abrasive materials.
STORING YOUR STOVE
1. DO NOT leave propane cylinder attached to stove while not in use.
2. Remove the cylinder, allow the stove to cool, and store regulator under the grate.
3. Unlock the windshield and fold down.
4. Close the lid and latch.
OUTFITTER SERIES ULTRA HIGH OUTPUT PROPANE STOVE
WARNING:
INSTRUCTIONS
Cover assembly
Burner control knobs
Piezo igniter
*Propane cylinder not included
ITEM #212
Pressure
regulator valve
Disposable
Propane
cylinder
(not included)