Page 1
G Infrared lamp Instruction for use SIL 06 – SIL 16 SIL 06 SIL 16...
Page 2
ENGLISH Content 1. About the infrared lamp ........2 6. Changing the infrared lamp ........5 2. Signs and symbols ..........2 7. Cleaning and care of the unit ....... 5 3. Notes ..............3 8. Disposal ............... 5 4. Initial use .............. 4 9.
Page 3
Permissible storage Dispose of packaging in an Storage environmentally friendly manner temperature and humidity Permissible operating Operating temperature and humidity 3. Notes Please read these instructions for use carefully and keep them for later use, be sure to make them accessible to other users and observe the information they contain.
Page 4
• Do not cover up or pack away the unit while it is warm. • Always remove the mains plug and let the unit cool off before you touch it. • Do not touch the unit with wet hands while it is plugged in; do not allow any water to be sprayed onto the unit.
Page 5
The distance between the infrared lamp and the radiated part of the body should not be less than the following: SIL 06: at least 24 in (60 cm) SIL 16: at least 32 in (80 cm) Always use the protective eyewear supplied during usage. The protective eyewear corresponds to the requirements of EN 171:2002 and serves to protect the eyes.
Page 6
Power consumption SIL 06: 100 W SIL 16: 150 W Dimensions (W x H x D) SIL 06: 120 x 205 x 165 mm SIL 16: 145 x 220 x 175 mm Max. Radiation intensity SIL 06: 680 W/m at 60 cm...
Page 8
Hans Dinslage GmbH, Riedlinger Straße 28, 88524 Uttenweiler, Germany www.sanitas-online.de...
Need help?
Do you have a question about the SIL 06 and is the answer not in the manual?
Questions and answers