How To Use - Swann SB1041N Manual

HOW TO USE

USE YOUR LOAF! READ ALL OF THIS FIRST!
Remove the bread pan (turn anti-clockwise to unlock and lift it out of the machine).
Wash the bread pan, paddle, cup and spoon in warm, soapy water. Rinse and dry
thoroughly.
Put the mixing paddle onto the peg in the bread pan then return the bread pan to the
machine (turn clockwise to lock). Feel free to try all the controls and options below to
get a feel for the machine.
As soon as the bread maker is plugged into power supply, a beep will be heard and
"1 3:00" will be displayed. But the colon between the "3" and "00" doesn't flash
constantly. This means the programme isn't running yet.
The number "1" on the left of the display is the default program (Basic). There are 14
of those in total. The arrow points to "2.0LB" and "MEDIUM" is selected. These are
the default settings.
Start/Stop Button
The button is used for starting and stopping the selected baking programme.
To start a program, press the START/STOP button once. A short beep will be heard,
the indicator will light up, and the two colon dots in the time display begin to flash and
the programme starts.
Any other button is inactive except the START/STOP button after a programme
has begun. To stop the programme, press the START/STOP button for approx. 3
seconds, then a beep will be heard, it means that the programme has been switched
off. This feature will help to prevent any unintentional disruption to the operation of
the programme. If accidentally you start a programme whilst familiarising yourself
with the controls simply press the START/STOP button for 3 seconds to reset.
Menu Button
The MENU button is used to set different programs. Each time it is pressed
(accompanied by a short beep) the programme will vary. Press the button repeatedly
to cycle through the 14 menu options. The menu option number will be shown on the
left of the display.
5
SB1041N_IM.indd 5 05/10/2016 13:57