MusicMedic Vortex Air Torch Instructions

Advertisement

Cautions:
The Vortex Air Torch™ is a tool and is intended to be used by professionals in a
professional environment. Our customers have successfully used this tool for installing
and removing pads, soldering, heating shrink tubing, re-hairing bows, and other
miscellaneous heating projects. Once you get used to using your Air Torch™, you will
find it to be an indispensable tool in your shop. .
1.
The tip of the Air Torch™ gets very hot. Do not touch it or use it in a manner that
will start a fire you are not intending to start.
2.
Notice that the Air Torch™ turns ON when the handle is lifted, OR FALLS FROM,
the holder. When you are not sitting at your bench and using this tool, make sure
that the Air Torch™ is turned off.
3.
When the Manual
your selected temperature. Do not leave the Air Torch™ running unattended.
Be sure to return the Air Torch™ to Automatic mode and allow the unit to cool
itself BEFORE turning off the power switch.
MusicMedic.com
Questions@MusicMedic.com
(910) 667-0270
Vortex Air Torch™
Instructions
/
Auto switch is engaged, the Air Torch™ will continue to run at

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Vortex Air Torch and is the answer not in the manual?

Questions and answers

Summary of Contents for MusicMedic Vortex Air Torch

  • Page 1 Instructions Cautions: The Vortex Air Torch™ is a tool and is intended to be used by professionals in a professional environment. Our customers have successfully used this tool for installing and removing pads, soldering, heating shrink tubing, re-hairing bows, and other miscellaneous heating projects.
  • Page 2 Controls:  The black up and down buttons adjust Temperature in Celsius.  The dial adjusts the speed of the air flow.  The black switch on the Air Torch™ powers the machine on or off.  The red square button changes between Manual and Automatic modes. In Manual mode, the Air Torch™...

Table of Contents