ALLIANCE 7SMGIAFBTS16 Assembly Instructions Manual

Foosball table

Hide thumbs

Table Of Contents

ASSEMBLY INSTRUCTIONS

NOTE:

Please carefully read through instructions once before proceeding with assembly.

(1) Heavy load, 2 or more adults are recommended to assemble.

(2) Proper lifting posture is recommended to avoid injuries.

(3) Table contains small parts & components not suitable for children.

(4) Table contains joints and connecting parts. Care should be taken during stowage &

assembly

(5) Products is free standing. Efforts should be made to ensure product is used on even

surface.

(6) Power tools are not required, but highly recommended.

Foosball Table

7SMGIAFBTS16

GIAFTS16RR

Table of Contents

Need help?

Do you have a question about the 7SMGIAFBTS16 and is the answer not in the manual?

Questions and answers

Summary of Contents for ALLIANCE 7SMGIAFBTS16

Page 1 ASSEMBLY INSTRUCTIONS Foosball Table 7SMGIAFBTS16 GIAFTS16RR NOTE: Please carefully read through instructions once before proceeding with assembly. (1) Heavy load, 2 or more adults are recommended to assemble. (2) Proper lifting posture is recommended to avoid injuries. (3) Table contains small parts & components not suitable for children.
Page 2 ASSEMBLY INSTRUCTIONS Foosball Table 7SMGIAFBTS16 GIAFTS16RR COMPONENTS: Insert threading part of ball entry cup into hole at side of table. Part Description Quantity Ensure the scoop portion is situated on the ¼” Support Rod outside. On the under side of cup, align and thread screw to secure it from rotating.
Page 3 ASSEMBLY INSTRUCTIONS Foosball Table 7SMGIAFBTS16 GIAFTS16RR COMPONENTS: All players are attached by bolt via front and correspnding nut at the back. Part Description Quantity Thread bolt through pre-fabricated holes Side panel in rod. Rod assembly sequence as below; Front Back All require handle, rod, bushing and player.
Page 4 ASSEMBLY INSTRUCTIONS Foosball Table 7SMGIAFBTS16 GIAFTS16RR COMPONENTS: With minimum 2 people, flip table to an up right position. Adjust leg leveller to ensure Part Description Quantity all legs of even height to avoid wobbling and even laying field. 3 Player rod...
Page 5 ASSEMBLY INSTRUCTIONS Foosball Table 7SMGIAFBTS16 GIAFTS16RR COMPONENTS: Position a set of the assembled legs with cross bar and leg levellers at each end of Part Description Quantity the table. Fig. 7 Cup holder Align drill holes and secure each leg with four (4) bolts &...
Page 6 ASSEMBLY INSTRUCTIONS Foosball Table 7SMGIAFBTS16 GIAFTS16RR Fig. 1. Fig. 4. Insert fixture rods (C7) to Top end panel Thread two (2) sets of bolt and washer (C9) - Fig 1. through side panel into corresponding end panels. Flipping over end panel and to attach to end panel with the same corresponding Repeat for all four (4) corners Fig.

This manual is also suitable for:

Giafts16rr