Important Safety Instructions; Read And Follow All Safety Instructions - Philips CoralCare User Manual

IMPORTANT SAFETY
WARNING
- To guard against injury, basic safety precautions should be observed,
including the following:
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS
DANGER
- To avoid possible electric shock, special care should be taken since water
is employed in the use of aquarium equipment. For each of the following
situations, do not attempt repairs by yourself; return the appliance to an
authorized service facility for service or discard the appliance:
1) If the appliance falls into the water,
If electrical components of the appliance get wet, unplug the appliance immediately. (Non-
immersible equipment only)
2) Carefully examine the appliance after installation. It should not be plugged in if there is
water on parts not intended to be wet.
3) Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning or
has been dropped or damaged in any manner.
4) To avoid the possibility of the appliance plug or receptacle getting wet, position aquarium
stand and tank to one side of a wall-mounted receptacle to prevent water from dripping
onto the receptacle or plug. A "drip loop," shown in the figure below, should be arranged by
the user for each cord connecting an aquarium appliance to a receptacle. The "drip loop" is
that part of the cord below the level of the receptacle, or the connector if an extension cord
is used, to prevent water traveling along the cord and coming in contact with the
receptacle.
If the plug or receptacle does get wet,
breaker that supplies power to the appliance. Then, unplug and examine for presence of water
in the receptacle.
Close supervision is necessary when any appliance is used by or near children.
To avoid injury, do not contact moving parts or hot parts such as heaters, reflectors, lamp
bulbs, and the like.
INSTRUCTIONS
DON'T
drip loop
DON'T
reach for it! First unplug it and then retrieve it.
unplug the cord. Disconnect the fuse or circuit