MIFRAM SECURITY MVB-3X Assembly Instructions Manual

Modular vehicle barrier

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

MVB-3X

Assembly

Instructions

Table of Contents

Need help?

Do you have a question about the MVB-3X and is the answer not in the manual?

Questions and answers

Summary of Contents for MIFRAM SECURITY MVB-3X

Page 2 Set of 6 MVB-3X...
Page 4 About the MVB-3X • The MVB 3X is a third generation advanced and improved version of the original Mifram MVB • When assembled units vertical element is impacted, it diverts the horizontal momentum into the air • The placement of the MVB is crucial. The Pictures demonstrate the correct orientation of the units •...
Page 5 Deployment Recommendations • If Possible, deploy the MVB-3X where the ramming car will be forced to approach at a lower speed by using natural obstacles like curves etc. • Block sidewalks and the sides of the road. • Use warning lights and signs.
Page 6 Orientation of Elements (Open side of L shape) in direction of potential threat MVB - 3X Deployment...
Page 7 Safety Warning Note that several parts are heavy (24 kg) and sharp. pay attention during unloading, assembling and packing Elements Placed upright prior to being joined can fall on their side and create a hazard...
Page 8 The complete MVB-3X...
Page 9 MVB-3X Parts...
Page 10 R Pin...
Page 11 Handle...
Page 12 Rod & End Unit...
Page 13 MVB-3X, Handle, Rod and End unit...
Page 14 Start on the left hand side...
Page 15 Pull out the safety R pin...
Page 16 Pull out the locking galvanized pin...
Page 17 Pull out the locking galvanized pin...
Page 18 Lift the upper part...
Page 19 Lift the upper part...
Page 20 Insert the locking Galvanized pin into the hole...
Page 21 Start from the left hand side. Insert rod...
Page 22 Insert the rod...
Page 23 Insert the End unit from the other side...
Page 24 Insert the End unit from the other side...
Page 25 Insert the locking pin...
Page 26 Secure with the security clasp...
Page 27 Add handle...
Page 28 Add handle...
Page 29 Insert the locking pin...
Page 30 Secure with the security clasp...
Page 31 Open the next unit...
Page 32 Commence second section - Insert second unit...
Page 33 Insert large locking pin and secure it with the clasp...
Page 34 Pull out the R pin from the bar...
Page 35 Pull out the locking pin...
Page 36 Repeat the same with the opposite bar...
Page 37 Assemble the two bars...
Page 38 Insert the locking pin...
Page 39 Insert the other locking pin...
Page 40 Assembled bars...
Page 41 Insert the R pin...
Page 42 Insert the R pin...
Page 43 Insert the R pin in the lower locking pin...
Page 44 Pull out the R pin from the lower bar...
Page 45 Pull out the locking pin from the lower bar...
Page 46 Swing the bar...
Page 47 Insert the locking pin...
Page 48 Secure with the R pin...
Page 49 Repeat the above steps Repeat the above steps as needed in order to get required barrier width...
Page 50 MVB-3X Assembling First Meter Exercise Care Units when opened and in standing position can tip and fall sideways. In order to prevent this, keep all units laying on their base on the ground surface until you are ready to join them.
Page 51 Assembling of the last right hand side unit...
Page 52 Assembling of the last right hand side unit...
Page 53 Insert the right handle...
Page 54 Insert large Locking pin and lock it with the clasp...
Page 55 Insert large Locking pin and secure it with the clasp...
Page 56 Assembled units with two handles...
Page 57 Pull handle in order to change wheels’ position...
Page 58 Thank you for purchasing Mifram MVB-3X. Please contact us with any question or information you may have. Our customers support is happy to help you. +972.4.880.8800 sales@mifram.com www.MiframSecurity.com © All Rights Reserved to Mifram Ltd. 2018...