Download Print this page

Tie Down Engineering Roof Zone Penetrator Assembly Instructions

Download this manual

Roof Zone Cart

Assembly Instructions

Model 65028B

Important – Please Read These Instructions Fully Before Starting Assembly

If you need have damaged or missing parts, call the Customer Service: 404-344-0000

• Check you have all the components listed on pages 2.

• Remove all parts from the plastic bags and separate them into their groups.

• Keep children and animals away from the work area, small parts could choke if swallowed.

• Make sure you have enough space to layout the parts before starting.

• Assemble on a hard level surface.

• Assembly of the axles/frame will be easier with 2 people.

Instruction Sheet

#08262

TIE DOWN ENGINEERING • Atlanta, GA 30336

www.tiedown.com (404) 344-0000

Page 1 of 4

Need help?

Do you have a question about the Roof Zone Penetrator and is the answer not in the manual?

Page 1 • Make sure you have enough space to layout the parts before starting. • Assemble on a hard level surface. • Assembly of the axles/frame will be easier with 2 people. Page 1 of 4 Instruction Sheet TIE DOWN ENGINEERING • Atlanta, GA 30336 #08262 www.tiedown.com (404) 344-0000...
Page 2 Components - Complete Parts List Please check you have all the component parts listed below Roof Zone Cart Model 65028B 9 11 Part # Description Qty. ✔ 65027-1 Penetrator Cart Frame 65027-6 Rear Axle Frame Hardware Kit #65027-7 65027-2A Front Axle Frame 65027-5 Axle Assembly 65027-3...
Page 3 Use a 15/16” socket wrench to tighten the nut/bolt just enough for the axle frame to turn freely (Do not over tighten). Page 3 of 4 TIE DOWN ENGINEERING • Atlanta, GA 30336 www.tiedown.com (404) 344-0000...
Page 4 Roof Zone is a Division of TIE DOWN ENGINEERING Atlanta, Georgia 30336 800-241-1806 • 404-344-0000 ISO 9001:2008 Certiﬁcation Trade, brand names and drawings are the intellectual property of TIE DOWN ENGINEERING. ©2016 TIE DOWN, Inc. Page 4 of 4 Instruction #08262 (E1447B Rev. 6-14-2017)

Roof zone 65028b