Subscribe to Our Youtube Channel
Related Manuals for Shinn Fu MichaelPro MP001002
Summary of Contents for Shinn Fu MichaelPro MP001002
- Page 1 OWNER’S MANUAL MP001002 X-TORQUE WRENCH SHINN FU CORPORATION 7F., No.408 Ruei Gaung Rd Nei Hu Disctrict www.michael-pro.com Taipei City 114 Tiawan R.O.C...
- Page 2 PRODUCT DESCRIPTION This specific torque wrench is a great innovative design approach to tire changing, intended exclusively for the controlled tightening of wheel nuts on cars, fast and safe changing tires to prevent over tightening and under tightening. Allows to use on both tightening nuts as a torque wrench at right direction driving with set torque value and loosening nuts as a cross wrench at left direction driving free of torque.
- Page 3 SPECIFICATIONS Square drive : 12.5mm (1/2”) Type : Acoustic “click” sound and light retroaction Range of work : 70 – 170 Nm ( 50 – 130 FTLB ) Actuation accuracy : +/- 4% Length of handle bar : 235 mm Length of Cross bar : 490 mm Weight...
- Page 4 GENERAL OPERATING SAFTY NOTES Please note the following safety notes and instructions for use in this manual to avoid malfunctions, damage or physical injure: • This tool is not intended for use by individuals (including children) with limited physical, sensorial or mental abilities or deficiencies in experience and/or persons unfamiliar with the torque wrench unless they are supervised by a person responsible for their safety or receive from this instruction in how the torque wrench is to be used.
- Page 5 INSTRUCTIONS FOR USE A. Work with torque wrench 1. Torque wrench mode. 1) Press lock/release bottom , slide handle shaft to the end of cross shaft and lock. 2) Note: The torque wrench function is only available in this mode. 3) Install proper socket onto square head ...
- Page 6 4. Final torque setting 1) Grasp handle of torque wrench and drive with steady force until a “click” is heard and/or a light retroaction felt, the set torque has been achieved. Do not continue to drive when wrench clicks. 2) Please note that the “click” becomes weaker with the lower torque settings. B.
- Page 7 3) Warning! DO NOT step down on the scale of window and handle of cross shaft , it may break and risk of injury. 2. Speed spinning mode. 1) Place the handle shaft in the middle of cross shaft , quick spinning for unscrew the bolt effortlessly.
- Page 8 Note: SHINN FU CORPORATION 7F., No.408 Ruei Gaung Rd Nei Hu Disctrict Taipei City 114 Tiawan R.O.C...
Need help?
Do you have a question about the MichaelPro MP001002 and is the answer not in the manual?
Questions and answers