REDT Miracle-A6 Instruction Manual
  1. Manuals
  2. Brands
  3. REDT Manuals
  4. Power Tool
  5. Miracle-A6
  6. Instruction manual

REDT Miracle-A6 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Miracle-A6 and is the answer not in the manual?

Questions and answers

Summary of Contents for REDT Miracle-A6

  • Page 2 CAUTION ☞ Be careful not to mount a key incorrectly (asshown in the following figures) when cutting or decoding. Standard(Edge) Key: Laser Key: MIRACLE-A6 - 1 -...

  • Page 3: Table Of Contents

     Cut Key by using IC Card number  IC Card is... ◆ Search for Use the Key Type - 44 ◆ Original Key Copy - 45 ◆ Key Cut Option - 47 ◆ Half Cut Method - 48 MIRACLE-A6 - 2 -...
  • Page 4  Auto Key Measurement  Multi-Stage Cutting Count  Trim  Stop  Clamp Reference Point Change - 71 ◆ Key Data Load Screen  Bitting Input  Read/Copy Original Key  Key Cutting  Menu MIRACLE-A6 - 3 -...
  • Page 5 ◆ Data and Firmware Upgrade Make sure to follow the below directions when you use the machine.  Miracle-A6 is designed to be operated DC24V. This machine is only to be operated made when DC24V is available. When any power supply other...
  • Page 6 The machine weighs about 21.5Kg and generates vibration on both sides during operation. If you use the machine on a weak, wobbly, or bumpy surface, it may lead to damage on machine/worktable or injury MIRACLE-A6 - 5 -...

  • Page 7: Cautions

    In winter, sub-zero temperatures, may cause the unit to be unable to work properly. If such thing happens, increase temperature work environment. Do not let the machine room temperature go below 0 degrees MIRACLE-A6 - 6 -...

  • Page 8: Parts

    Tool change (CP-T25) M5 bolt 2 EA Used to fasten Cutter or Decoder (CP-95) Stopper 1 EA Guide for Key positions (CP-91) Stopper Guide for alignment-key location Right-to-Left 1 EA to hold a key from right-to-left (CP-96) MIRACLE-A6 - 7 -...
  • Page 9 Product instruction guide USB Communication Connecting the product to PC 1 EA Cable for communication ☞ TIP)  Cutters and spindle belts are consumables. Make sure to replace them with the new one on a regular maintenance schedule. MIRACLE-A6 - 8 -...

  • Page 10: Parts Names

    Parts Names Front Shield Cover Power Switch (Emergency Switch) LED Light Decoder Clamp Spindle Clamp Knob Clamp Holding Lever Tool box Chip Tray USB Communication Port Power Port 12V DC MIRACLE-A6 - 9 -...

  • Page 11: Specifications

    XY Axis: 0.005mm, Z Axis: 0.00125mm Spindle Revolution 8,750 rpm Spec. Bluetooth Specification V1.2 Bluetooth Frequency 2.4GHz ISM Band Profile SPP, GAP Temperature 0 - 40 ºC Humidity 10 - 90 % Usage Cutting and duplicating keys MIRACLE-A6 - 10 -...

  • Page 12: Key Pad

    Load key data from maker list. [Retrieve key by Maker] Enters selection or starts action. [ENTER] Goes into menu [MENU] Measures cutter or decoder length [TOOL CHANGE] While cutting: Cancel cutting Menu: Jump to start [STOP] MIRACLE-A6 - 11 -...

  • Page 13: Cutter

    If you press the [Enter], the length of Cutter is Automatically measured. ☞ TIP)  If the key is not cut accurately or there is a loud noise in cutting, check the Cutter condition and replace it if necessary. MIRACLE-A6 - 12 -...

  • Page 14: Decoder

    Blade Diameter 1.0mm [How to Replace] Loosen the bolt with a T-wrench to replace the Decoder. Press the [Tool Change] button in the keypad. If you press the [Enter], the length of Decoder is Automatically measured. MIRACLE-A6 - 13 -...
  • Page 15 Decoder, the Decoder will break off.  Take extra care not to drop Decoder, to impact to the Decoder nor make mistakes when using it.  The manufacturer of resellers are not responsible for the breaking of Decoder, in any cases. MIRACLE-A6 - 14 -...

  • Page 16: Spindle Belt

    Spindle Belt Miracle-A6 delivers rotational force to the Spindle through the Spindle Belt. The Spindle Belt is perishable. If the key does not cut accurately or there is a loud noise in cutting, check the spindle belt condition and replace it if necessary.

  • Page 17: Type Of Clamps

    Type of Clamps Miracle-A6 can be used by exchanging three types of clamps according to the type of keys to be processed. [Clamp Type] 1) Automobile key (CP-86) No.1 Clamp 2) Dimple key (CP-88) No.2 Clamp 3) Single Sided key (CP-89) No.3 Clamp...

  • Page 18: How To Replace The Clamp

    3. Push the desired Clamp into the groove. Turn it in as far as possible and fasten the holding Lever. ☞ TIP)  If the Clamp holding Lever is located in a position that prevents you from fastening the Clamp, you can adjust the Lever position. MIRACLE-A6 - 17 -...

  • Page 19: How To Adjust Clamp Holding Lever Position

    3. Push it into the original position, turning clockwise.  If you fasten the Clamp by pressing down the Lever repeatedly, the Clamp may wobble. The Clamp must be tightened by turning the Lever. DON’T Press Down DO Turn Clamp MIRACLE-A6 - 18 -...

  • Page 20: How To Use The Another Clamps

    [How to Use the Another Clamps] - When cutting and copying keys, press [MENU] button from the key fixing screen to choose a clamp. Laser Key Standard Key Single Sided key (CP-89) Dimple key (CP-88) MIRACLE-A6 - 19 -...

  • Page 21: How To Fasten Keys By Clamp Types

    - Position of the Stopper (CP-91) is changed based on the reference point of the key. The following are the positions for the standard Stopper (CP-91) in the shoulder align key and the tip align key. Tip Align Shoulder Align (CP-91) (CP-91) MIRACLE-A6 - 20 -...
  • Page 22 (Follow the instruction displayed in the LCD of the sure the key tip touches the Stopper and fasten the machine for the groove to use or decide the groove Clamp tightening handle based on the key length.) Cross-Section of Laser Key Fastened MIRACLE-A6 - 21 -...
  • Page 23  Shoulder Align Laser Key * Display in LCD CP-91  Tip Align Laser Key * Display in LCD If you hold the opposite side of the key, an additional Clamp (CP-96) is required. MIRACLE-A6 - 22 -...
  • Page 24  Take extra caution not to fasten the key incorrectly as in the below examples. Standard Key Laser Key MIRACLE-A6 - 23 -...

  • Page 25: Dimple Key Clamp (No.2 Clamp)

    2) Dimple Key Clamp (No.2 Clamp) (CP-88) [How to Fasten Key]  Shoulder Align Key * Program Screen Install the key by aligning the shoulder as shown in the picture.  Tip Align Key * Program Screen MIRACLE-A6 - 24 -...
  • Page 26 1. Set the Stopper as shown in the 2. Align the key to the Stopper and program screen. fasten the Clamp tightening handle to hold the key. MIRACLE-A6 - 25 -...

  • Page 27: Single Sided Key Clamp (No.3 Clamp)

    Place the key and turn the Clamp tightening handle to hold the key. Insert the key horizontally on the above groove and affix it by turning the Clamp tightening handle. Shoulder Align 1 Shoulder Align 2 MIRACLE-A6 - 26 -...
  • Page 28 Tip Align  When installing the key, place it by horizontally, aligning it with the Clamp as shown in the below. MIRACLE-A6 - 27 -...
  • Page 29 Clamp will be damaged by the Cutter. Be sure to change the direction of Clamp to fit to the width of the key.  Since Miracle-A6 has no function to detect the validity of Clamp, be sure to check the direction of the Clamp. Users are responsible for all damaged tools and Clamp.
  • Page 30 1. Loosen the Clamp knob as much as possible and separate the guide. 2. Change the guide direction 3. Insert the guide into the groove again 4. Fasten the Clamp tightening handle to hold the guide. MIRACLE-A6 - 29 -...

  • Page 31: How To Use Auxiliary Key Hold Bracket Set

    2. Place the Auxiliary Key Clamp 1. Fasten the key on the Clamp. hole of the Auxiliary Key Clamp set on the Clamp and loosely set and fasten it to press the fasten the bolt. Key. MIRACLE-A6 - 30 -...

  • Page 32: How To Use Tibbe Clamp

    How to Use Tibbe Clamp (CP-61) Miracle-A6 can cut Ford or Jaguar Keys using Tibbe Clamp.  Direction (e.g.: Ford 6 cut, Silca: FO21) Unfasten the bolt (Jaguar 8 Cut) on the left of the Clamp (image below) and fasten the bolt (Ford 6 Cut) on the right by hand (Make sure to fasten by hands and do not fasten too hard).

  • Page 33: How To Use Ldv(Fo19) Clamp

    How to Use LDV (FO19) Clamp (CP-62) Miracle-A6 can cut LDV Key using LDV (FO19) Clamp.  How to Use 1. Insert the key in the indicated direction. 2. Fasten the bolt to fasten the key. Place the LDV Clamp on the Automobile Key Clamp and push it to the left to the maximum and fasten it.

  • Page 34: How To Use Sx9 Key Clamp

    How to Use SX9 Key Clamp Auxiliary Clamp enables easy SX9 key (Side A) and thin standard (edge) key holding. SX9 Key Holding MIRACLE-A6 - 33 -...

  • Page 35: Clamp Origin Setting

     Since the distance between Decoder and Cutter is already measured at the factory, it doesn’t have to be measured again.  If the distance between the Decoder and Cutter is measured again, the origins of all clamps should be measured again. MIRACLE-A6 - 34 -...

  • Page 36: Auto Setting

    [Enter] button. For laser keys, make sure to use an end-reference key. 6. If [Enter] button is pressed, the decoder will sense the key fixed to the clamp and measure the Origin of the clamp automatically. MIRACLE-A6 - 35 -...

  • Page 37: Manual Setting

    5. If the Origin value needs to be changed, press any number key. The number on which the cursor is located will be changed and press button to change the current cursor location if needed. Once entering is completed, press [Enter] button. MIRACLE-A6 - 36 -...
  • Page 38  The Origin value above is an example. Do not use this value for the actual product. ☞ TIP)  After changing, make sure to note X and Y-Origin values for convenient follow-up maintenance. MIRACLE-A6 - 37 -...

  • Page 39: Key Cutting Procedure

    [Enter] button. Select a Model and press [Enter] button. Enter the key type to be cut and press [Enter] button. After selecting Cut Key and press [Enter] button. Enter bitting with number buttons and press [Enter] button. MIRACLE-A6 - 38 -...
  • Page 40 After setting processing options depending on the key materials status, press [Enter] button to start processing. ☞ TIP)  From No. 7 screen, press [Menu] button and select single blade key clamp, and replace the clamp to process the key. MIRACLE-A6 - 39 -...

  • Page 41: Laser Key

    After selecting Cut Key and press [Enter] button. Enter bitting with number buttons and press [Enter] button. ☞ TIP)  If there are more than 6 digits of bitting, press either to move to the previous or next digit. MIRACLE-A6 - 40 -...
  • Page 42 [Enter] button to start processing. ☞ Processing Option (See page 30) ☞ TIP)  From No. 8 screen, press [Menu] button and select Dimple key clamp, and replace the clamp to process the key. MIRACLE-A6 - 41 -...

  • Page 43: Cut Key By Using Ic Card Number

     If there are more than 6 digits, enter the number by pressing the applicable number key twice, ranging from No. 1 to No. 5 button. Select View Key Info and Enter it to see information on the key. MIRACLE-A6 - 42 -...

  • Page 44: Ic Card Is

    E.g.) Manufacturer: Hyundai Model: Azera 1. Select “Hyundai” in “Manufacturer.” 2. Select “Model.” (Grandeur [TG] is registered as “Azera” in the instar code.) 3. Press “Do search”. You can check Grandeur TG’s “IC Card” number: “824” MIRACLE-A6 - 43 -...

  • Page 45: Search For Use The Key Type

    Select a model and press [Menu] button. Select a key material manufacturer and press [Enter] button. Enter the key type to be cut and press [Enter] button. LCD data screen appears. MIRACLE-A6 - 44 -...

  • Page 46: Original Key Copy

    Original Key Copy Miracle-A6 provides a function to copy the original key by using the decoder. 1. Replace the tool with the decoder. 2. Press [InstaCode Card Number or Model] button to select a model. 3. Select [2. Copy Key] and press [Enter] button.
  • Page 47 • Decoding may result in inaccurate results, depending on key status, key fixing status or the accuracy of chin or end reference. • The company is not liable for a broken decoder in any circumstance. MIRACLE-A6 - 46 -...

  • Page 48: Key Cut Option

    Key Cut Option Miracle-A6 can perform accurate key processing by configuring the processing option according to the type of key and the strength of the material. The processing option can be changed by pressing the number button on the left side of the option item.

  • Page 49: Half Cut Method

    Half Cut Code you want. Whenever you press buttons, the Half Cut Code will be changed as following 1.5 → 2.5 → 3.5 → 1.5 → … 2. Press [Enter] button to move to the next digit. MIRACLE-A6 - 48 -...
  • Page 50 CodeMaster MIRACLE-A6 - 49 -...

  • Page 51: Program Installation

    1. Insert the supplied CD in a computer and run the installation program. 2. Install the program in the order of directions shown in the pictures below. 3. If the program is successfully installed, “Portal to Miracle” icon will be created on desktop as below. MIRACLE-A6 - 50 -...

  • Page 52: Bluetooth Wireless Connection

    Connect the USB cable to the USB port located on the back of the product as shown in the left picture. ◈ Portal to Miracle Program 1. Click on the desktop to run the program as below. MIRACLE-A6 - 51 -...
  • Page 53 2. Press , then the key making program which has same screen as the Miracle-A6 will be shown on the computer screen. MIRACLE-A6 - 52 -...

  • Page 54: Basic Menu

    - When you press Automobile Key in the initial screen, a list of manufacturer appears. Move to the next screen pressing the arrow. Select the manufacturer, model and year for the operating key and load the data. MIRACLE-A6 - 53 -...
  • Page 55 4. Select HU92. 3. Select the key blank. When you know the exact name of the operating key blank, you can select it from the key list to open the data. MIRACLE-A6 - 54 -...

  • Page 56: Motorcycle Key

    - When you press Standard Key in the initial screen, a list of general key manufacturer appears Move to the next screen pressing the arrow. Select the manufacturer and model of the operating key and load the data. MIRACLE-A6 - 55 -...

  • Page 57: Key Blank Search

    Key manufacturer: SILCA Key blank: HU66 1. Press in the initial screen. 2. Press the arrow indicated in the red circle and change the key search method to “Key Blank.” 3. Enter the key type and press MIRACLE-A6 - 56 -...
  • Page 58 You can search the key data by entering “IC Card” number registered in InstaCode. 1. Press in the initial screen. 2. Press the arrow indicated in the red circle and change the key search method to “IC Card.” 3. Enter “IC Card” number and press to load the data. MIRACLE-A6 - 57 -...
  • Page 59 Manufacturer: Hyundai Model: Azera 1. Select “Hyundai” in “Manufacturer.” 2. Select “Model.” (Grandeur [TG] is registered as “Azera” in the instar code.) 3. Press “Do search”. You can check Grandeur TG’s “IC Card” number: “824” MIRACLE-A6 - 58 -...

  • Page 60: Convenient Features

    Convenient Features Miracle-A6 offers various convenient features for users. [Convenient Features] Press the button to view the previous key data. Press the button to view the key data record. Register the frequently used key in “Favorite” for faster and easier data reading.

  • Page 61: Previous Key Data View

    Press the above button to view the recent key cutting list and data as shown in the below picture. You can check the cut key list. 3) Favorite Press the above button to read the registered frequently used key data. You can register the frequently used key data in Favorite for faster data reading. MIRACLE-A6 - 60 -...

  • Page 62: Customer Information

    4) Customer information Retrieve the saved customer information. Data for vehicles and customers you have handled before can be saved and managed. Moreover, when you work for same customer and same vehicle, it can be easier. MIRACLE-A6 - 61 -...

  • Page 63: Key Cutting Procedure

    Press Automobile Key in the initial screen to open the list of manufacturer. Select “Hyundai” in the manufacturer list. Select “Sonata” in the model. Select “Year” in list. Press on the upper right of the screen. MIRACLE-A6 - 62 -...

  • Page 64: Laser Key

    [Laser Key] e.g.) Manufacturer: Hyundai Model: Azera Year: 2007 Align: Tip Key Type: Standard Key Press Automobile Key in the initial screen to open the list of manufacturer. Select “Hyundai” in the manufacturer list. MIRACLE-A6 - 63 -...
  • Page 65 Enter the bitting in order and press After checking the bitting, press on the lower right of the screen. Install the key on the Clamp as explained in the screen. (refer to key installation methods) Check speed and tool thickness and press MIRACLE-A6 - 64 -...

  • Page 66: Original Key Copy

    Year: 2005 Press the Vehicle Key icon in the initial screen to open the manufacturer list. Select “Audi” in the list. Select “A4” in the Vehicle Model list. Select the Vehicle manufactured year. Press on the right. MIRACLE-A6 - 65 -...
  • Page 67 (refer to key installation) and press the button When decoding is complete, the bitting number appears on the screen. When you want to cut the key following the decoded data, hold the new key on the Clamp and press for key cutting. MIRACLE-A6 - 66 -...

  • Page 68: Key Cut Option

    Key Cut Option Cutter Speed Auto Key Cutting Depth Multi-Stage Thickness Trim Stop Setting Measure Setting Cutting Count Setting MIRACLE-A6 - 67 -...

  • Page 69: Speed Setting

    Clamp damage and ensure cutting to accurate depth. Used regardless of the reference point of the key. It automatically measures center of the key (this function is used when there is an error in key materials). MIRACLE-A6 - 68 -...

  • Page 70: Multi-Stage Cutting Count

    - For Laser Key cutting, you can select the desired button to make cutting in multiple stages. Press the button to assign the cutting stage up to 3 counts. 6) Trim - Press the button to trim the key after cutting. MIRACLE-A6 - 69 -...

  • Page 71: Stop

    - You can change the Stopper position based on the key length. When you press the Clamp picture repeatedly in the cutting setting screen, you can change the Clamp reference point based on the key type and fasten the key material. e.g.) Tip Align Laser Key CP-96 MIRACLE-A6 - 70 -...

  • Page 72: Key Data Load Screen

    - When you press the button below, the bitting input screen appears. Enter the bitting in number. [Bitting Edit] You can edit the bitting by using the arrows at the bottom of the screen or manually changing the number. * After Edit * MIRACLE-A6 - 71 -...
  • Page 73 Round off the code-added/deleted bitting or the decoded number into the integer to make it into general bitting. e.g.) 1.2 -> 1 and 1.7 -> 2 ☞ TIP)  The bitting in the Decimal point is displayed in blue. MIRACLE-A6 - 72 -...

  • Page 74: Read/Copy Original Key

    - Press the button to read or copy the original key. (P. See 69) 3) Key Cutting - Press the button to cut the key. (P. See 56) 4) Menu - Press the button to display new menu. [Home] Return to the initial screen. MIRACLE-A6 - 73 -...
  • Page 75 Press the button to register the current key data to Favorite. e.g.) Manufacturer: BMW Model: M3 1. Register Open the registering key data and press on the lower left. Press in the menu at the bottom of the screen. MIRACLE-A6 - 74 -...
  • Page 76 Press in the box. Press in the box. 2. Open Press in the initial screen. Press favorite to check the registered key data. 3. Delete Press in the initial screen. MIRACLE-A6 - 75 -...
  • Page 77 Press and Press the data button you want to delete. Press in the box. [Tool Measure] When you replace the Cutter during operation, you can measure the Cutter length without going to the setting menu. MIRACLE-A6 - 76 -...
  • Page 78 Enter pin number, and press Press , and go to the next screen. Press the empty field of customer name and press to enter the name. Press the empty field of vehicle number, and press and press MIRACLE-A6 - 77 -...
  • Page 79 Press on the upper right corner to edit data and press to save it. 3. Delete Select data to be deleted and press If you press , then data will be deleted. MIRACLE-A6 - 78 -...
  • Page 80 Data and Firmware Upgrade Miracle-A6 provides the function to connect the device and PC through a USB cable and automatically upgrade data and firmware. New key data and product functions can be easily added through this. 1. Double click on the home screen to execute the program.
  • Page 81 ☞ TIP)  In order to upgrade the data and firmware of the Miracle-A6, the PC and the device should be connected by USB cable.  Firmware means a program embedded in the CPU of a mainboard in the device. It controls the operation of the device.
  • Page 82 3F, 1314 GwanPyeong-dong Yuseong-gu Daejeon, Republic of Korea, 305-509 TEL:+82-70-7011-0905 FAX: +82-42-673-0905 Copyright© 2005-2013 RED TECHNOLOGY MIRACLE-A6 - 81 -...
  • Page 83 The manufacturer’s warranty lasts for 12 months from the purchase date and the below is the warranty details. Warranty Details 1. Warranted Product: Miracle-A6 2. Warranty Period: 12 months from the purchase date. However, if it is unable to confirm the purchase date, 13 months from the manufactured date is the warranty period.

Table of Contents