Higuera Bamboogle BRAZIL Coffee Manual

Advertisement

Quick Links

1
INTERESTING FACTS ABOUT BAMBOO & BAMBOOGLE
Handmade Bamboo Furniture
Thank you for purchasing a piece of our handmade bamboo furniture from Bamboogle. Know that each piece has been
handled dozens of times by skilled craftsman through the cutting, sanding and finishing process. Also know that each
piece is made up of many laminated strips that are glued side by side and create the lumber used for the legs and tops.
Birth marks, or character markings are common in most solid wood furniture, especially if they are handmade. Since
bamboo lumber is made of hundreds of laminations, you will notice end grain, edge grain, and flat grained markings.
bamboo table leg will have edge grain on two opposing sides, with the other two sides being flat grain. The flat grain
reveals bamboo's most unique and distinctive 'knuckles' or joints, which are the rings you see around a bamboo shoot.
These joints are visible on each strip of laminated bamboo and are the birthmarks and richest characteristics of each
piece.
It is these markings that create the intrigue and drama in each piece. No two legs are ever the same, and certainly no
two tables are ever the same. Enjoy the character markings of your table and prepare yourself for interesting
conversations about it with others.

Grain Pattern Gives You Options On Leg Assembly

Since bamboo lumber is made of multiple laminations, the legs will reveal edge grain on two sides, and flat grain on the
other two sides. You have a choice as to which grain pattern you prefer to be on the end of the tables, or side. This
only pertains to the legs.

Simple Care Instructions

Treat your Bamboogle table as you would any other piece of finished furniture. Bamboo is harder than maple but care
must be taken to avoid dents and scratches to the surface. Wipe standing water off of finish to reduce the chance of
water marks.

UNIVERSAL INSTRUCTIONS

This set of instructions are for the entire Brazil Collection. Each table assembles in the exact
same way and uses the same parts, except for the length of the rails or legs, and perhaps a
difference in the number of screws used to attach the table top to the leg & rail frame.
The following pages have both a written explanation, and a set of images during the assembly
process.
BRAZIL COLLECTION
Coffee, Console, Side, Bench, Mini Coffee-Side
A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Bamboogle BRAZIL Coffee and is the answer not in the manual?

Questions and answers

Summary of Contents for Higuera Bamboogle BRAZIL Coffee

  • Page 1 BRAZIL COLLECTION Coffee, Console, Side, Bench, Mini Coffee-Side INTERESTING FACTS ABOUT BAMBOO & BAMBOOGLE Handmade Bamboo Furniture Thank you for purchasing a piece of our handmade bamboo furniture from Bamboogle. Know that each piece has been handled dozens of times by skilled craftsman through the cutting, sanding and finishing process. Also know that each piece is made up of many laminated strips that are glued side by side and create the lumber used for the legs and tops.
  • Page 2 QUICK OVERVIEW OF ASSEMBLY PROCESS TOOLS REQUIRED: Slot Screwdriver & Phillips Screwdriver (do not use power drill) TIME REQUIRED: 10-20 minutes, 30 if you're new to assembling things 1 Lay out all parts in like groups 2 Prepare the leg & side rails to attach together 3 Complete the leg &...
  • Page 3 1 Lay out all parts in like groups Hardware Parts Terminology Comment Leg Pin Bolt 4 of them screw into the pre-installed Female Leg Sockets Disk Bushing Slips into the predrilled holes in the Wood Rails (see the Phillips head tightening bullet inside the bushing) Wood Screw Screws the Leg &...
  • Page 4 3 Preparing the Rails Line up the holes in the disks to receive If you miss, use the slot the Leg Pin Bolts Place carefully in holes screwdriver to rotate disk 4 Complete the leg & rail assembly, which makes a table frame with no top. Make one end, then the other end, then add the long rails to complete the frame Assemble the two ends, making 2 pairs.
  • Page 5 6 Attach the underside of the top to the leg assembly Hand tightening works very well, do not use a power drill 7 Hand tighten if necessary (do not use a drill) (this image is shown before frame is screwed to underside of table top)

This manual is also suitable for:

Bamboogle brazil consoleBamboogle brazil sideBamboogle brazil benchBamboogle brazil mini coffee-side

Table of Contents