Summary of Contents for hayneedle Coral Coast NINB005-1
- Page 1 ITEM NAME: Coral Coast Sanders Steel Mesh Outdoor Extension Patio Dining Table SKU:NINB005-1 For assistance with assembly, please contact customer service 1-888-880-4884...
- Page 2 PRE-ASSEMBLY PREPARATION: DO NOT LET CHILDREN PLAY IN OR AROUND THE UNIT DUE TO THE POSSIBLE RISK OF FINGER ENTRAPMENT IMPORTANT: PLEASE READ INSTRUCTIONS BEFORE ASSEMBLY - Identify all parts prior to assembly against the part list. - Remove all packaging and place parts on a non-abrasive surface to avoid scratching. - If any parts are missing or damaged DO NOT ATTEMPT TO ASSEMBLE, please contact the customer service center.
-
Page 3: Hardware List
HARDWARE LIST: Metal Washer Qty:4 Lock Washer Qty:4 Nut (M10) Qty:4 Screw M10x680 Qty:4 Plastic Foot Cap Qty:4 Nut Wrench Qty:1... - Page 4 STEP-BY-STEP ASSEMBLY: STEP 1: Place table top (A) upside down on a non-abrasive surface. Insert four screws (G) into each corner of the table top (A). Slide the four legs (C) over the four screws (G). Using the nut wrench (I), secure each leg with the metal washers (D), lock washers (E) and nuts (F).
- Page 5 STEP 3: Expand the table top to increase the length of the table. Remove the stored panels from the shelf underneath the table top, fig 3. STEP 4: Insert the panels in the middle of the table top as shown in fig. 4. STEP 5: Slide the four panels together to lock in place, fig.
- Page 6 STEP-BY-STEP ASSEMBLY: STEP 6: To reduce the size of the table, reverse the procedure and store the extra panels on the shelf underneath the table top, fig 6. STEP 7: Push the lever down to lock the table into place fig 7.
- Page 7 Part descriptions Parts image Table Top Table Rim Table Leg Metal Washer Lock Washer Nut (M10) Screw M10x680 Plastic Foot Cap Nut Wrench...
Need help?
Do you have a question about the Coral Coast NINB005-1 and is the answer not in the manual?
Questions and answers