Page 1
Model: NE Model: NS Model: NST T T T - - - - 1 1 1 1 Model: NS Model: NS TAIKO ENTERPRI TAIKO ENTERPRIS S S S ES CORP. TAIKO ENTERPRI TAIKO ENTERPRI ES CORP. ES CORP. ES CORP.
NST-1 Tub Cup Type Sake Warmer --------------------------------------------7 General Operation For All Models ----------------------------------------------8 Server Bottle Tray Adjustment --------------------------------------------------9 Clean the Sensor --------------------------------------------------------------------10 Sake Warmer (model NEC-1) with Cube Container ------------------------10 Set Temperature Control ---------------------------------------------------------11 Set up Cube Container ------------------------------------------------------------12 Filling Server Bottle ---------------------------------------------------------------12...
Safety Precautions: Safety Precautions: Safety Precautions: Safety Precautions: WARNINGS: WARNINGS: WARNINGS: WARNINGS: ● The AC PLUG must be inserted directly into an outlet, NEVER USE AN NEVER USE AN NEVER USE AN NEVER USE AN EXTENSION CABLE. EXTENSION CABLE. EXTENSION CABLE. EXTENSION CABLE.
Additional Accessories for NE- - - - 1 1 1 1 Additional Accessories for NE N N N N EC EC- - - - 1 1 1 1 , NE , NE- - - - 1 1 1 1 Control Panel Control Panel Additional Accessories for NE Additional Accessories for NE...
NST- - - - 1 1 1 1 TUB CUP TYPE SAKE WARMER TUB CUP TYPE SAKE WARMER TUB CUP TYPE SAKE WARMER TUB CUP TYPE SAKE WARMER Specifications: Specifications: Specifications: Specifications: Power Consumption: 120V, 50Hz/60Hz, 500W. Sake Supply Type: Tub Cup Dimensions: W 6-5/16”...
GENERAL GENERAL OPERATION GENERAL GENERAL OPERATION OPERATION FOR ALL MODELS: OPERATION FOR ALL MODELS: FOR ALL MODELS: FOR ALL MODELS: 1. Placing Sake Warmer 1. Placing Sake Warmer Unit. 1. Placing Sake Warmer 1. Placing Sake Warmer Unit. Unit. Unit. ●...
● Please pay special attention to the overflow water coming out from overflow exit tube, below the front corner. Avoid contact with the hot water. ● If the tank is empty, a protection circuit will turn power off automatically. In order to reset the protection function, turn power off immediately. Put water in the tank at a suitable level and turn the power back on.
4. Clean the Sensor 4. Clean the Sensor 4. Clean the Sensor 4. Clean the Sensor Clean the sensor at nozzle with tooth brush once a month. 5 5 5 5 ..Sake Warmer (model NEC Sake Warmer (model NEC Sake Warmer (model NEC Sake Warmer (model NEC- - - - 1 1 1 1 ) with CUBE CONTAINER ) with CUBE CONTAINER...
● Set the temperature control knob at the desired position. When the water temperature reaches the adjusted level, the temperature indicator turns off ( model NEC-1,NE-1 apply 30~70 degree C dial gauge, model NST-1 apply warm and hot dial gauge) See Page 4.
8 8 8 8 . Setup CUBE CONTAINER . Setup CUBE CONTAINER . Setup CUBE CONTAINER . Setup CUBE CONTAINER ● The CUBE CONTAINER has screw, bayonet mount. Before attaching the sake warmer Coupler, please note the lever on the side of coupler. Make sure this lever is in the CLOSE position.
● Turn on the POWER switch and the Green Power Lamp turns on. ● Insert the nozzle into a server bottle. Push back the server bottle until the nozzle is in a straight position. Leave the server bottle on the tray while it fills (When nozzle is in a straight position, the server bottle begins filling with sake).
1 1 1 1 1 1 1 1 . Finish Sake Warmer Unit: . Finish Sake Warmer Unit: . Finish Sake Warmer Unit: . Finish Sake Warmer Unit: ● When finished serving sake, you must CLOSE the Coupling lever. There is no more sake in the warmer tube from CUBE CONTAINER.
1 1 1 1 2 2 2 2 . Cleaning Sake Warmer Unit: . Cleaning Sake Warmer Unit: . Cleaning Sake Warmer Unit: . Cleaning Sake Warmer Unit: ● Use the Empty CUBE CONTAINER and remove its top. Put hot water into the container.
Sake Warmer (model Sake Warmer (model NST Sake Warmer (model Sake Warmer (model NST- - - - 1 1 1 1 ) with TUB CUP ) with TUB CUP ) with TUB CUP ) with TUB CUP Set Up Sake Set Up S ake into TUB CUP: into TUB CUP:...
1-2-4 Nakamura-kita, Nerima, Tokyo 176-023 JAPAN PH# 339700943 Distributor: TAIKO ENTERPRISES CORP 1467 W 178 street, Gardena CA 90248 PH# 310-715-1888 Electrical Rating: Single Phase, 120V, 50/60Hz, 1000W(NEC-1,NE-1), 500W(NST-1) Heating Method: Indirect Heating via Hot Water bath. Made in Japan...