CROWN AT NORMAL POSITION TIME SETTING DATE SETTING DATE SETTING THE TIME Pull out Crown all the way until it stops (position ‘C’). The second hand will stop. Rotate the Crown in either direction until desired time is obtained. Push Crown back in all the way (position ‘A’) to re-engage time keeping.
SETTING THE TIME, DAY AND DATE If your watch has a Date or a Day and Date Window, pull the Crown out to position ‘B’ and turn the Crown in both directions until the Date showing is the day before the desired Date. Pull out the Crown all the way (position ‘C’) and turn the Crown to advance time.
MODEL #706S 2 SUBDIALS FEATURES • Hours, Minutes, Seconds, Date and Day of the week • Date, Day Sub Dials SETTING FEATURES To advance the Day: A) Do not set the day of the week between 8:00pm and 3:00am.
Page 6
B) Push recessed button ‘C’ with pen or pin once to advance the day. C) Repeat step B until desired Day is obtained. To advance the Date: A) Do not set the Date between the hours of 8:00pm and 3:00am. B) Press ‘A’...
Page 7
MODEL #706.3S 3 SUBDIALS FEATURES • Hours, Minutes, Seconds, Month, Date and Day of the Week are displayed • Month/Date/Day Sub Dials...
Page 8
SETTING FEATURES To advance the Day: A) Do not set the day of the week between 8:00pm and 3:00am. B) Push recessed button ‘C’ with pen or pin once to advance the day. C) Repeat step B until desired Day is obtained. To advance the Date: A) Do not set the Date between the hours of 8:00pm and 3:00am.
Page 9
follow the directions below: A) Pull the crown ‘B’ to time setting position ‘2’. B) Rotate the crown clockwise or counter clockwise until desired time is obtained. C) Push the crown into position ‘1’ when desired time is obtained. If you have a screw down crown, push the crown into position ‘1’ and screw down the crown clockwise until crown is locked, when desired time is obtained.
Page 10
DIAGRAMS FOR ADJUSTABLE BRACELET WATCHES CLASP EXTENDER TWO SCREW SYSTEM Screw in one at a time ONE SCREW SYSTEM SCREW SCREW SCREW...
CONNECTION SYSTEM CONNECTION SCREW Use 2 screwdrivers Hold one side steady before turning the screw PIN AND TUBE Metal pin, push to close Push to open...
Page 12
METAL INSERT Metal insert, push to close Push to open FOLD-OVER BUCKLE SMALLEST SIZE LARGEST SIZE Compress the push pin, and put the ends into the suitable holes along the buckle SAFETY BAR...
Page 13
Dear Customer: Help your watch/jewelry retailer protect our environment by properly recycling the button cell battery in your watch. Professional jewelers and watch retailers are best equipped to replace the battery in your watch without damage to the watch case and movement inside. They have the specialized tools and experience to do the job right.
If your watch requires cleaning, lubrication, battery changing, or needs a crystal replaced, ANNE KLEIN NEW YORK WATCH approved Service Centers are available in your area. These repair facilities use ANNE KLEIN NEW YORK WATCH parts and components to assure quality and future performance. Free...
Page 15
Carefully pack your watch in a sturdy box (do not send in a gift box for same will not be returned) and mail to the nearest approved authorized service station: ANNE KLEIN NEW YORK WATCHES ANNE KLEIN NEW YORK WATCHES...
LIFETIME LIMITED WARRANTY This ANNE KLEIN NEW YORK WATCH is warranted to you, the owner, for your lifetime against all defects in material or workmanship. This warranty does not apply to normal wear and tear or abuse and excludes batteries, case, strap, crystal, or bracelet.
Page 17
The above remedy is exclusive. ANNE KLEIN NEW YORK WATCH shall not be liable for any incidental or consequential damages. Should any other part of your watch require repair, please use our Service Center for quick and inexpensive repairs on your watch. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.
Need help?
Do you have a question about the 706S and is the answer not in the manual?
Questions and answers