Page 2
IMPORTANT SAFETY INFORMATION Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been exposed to rain or moisture, does not operate normally, or has been dropped.
Page 3
Welcome to Mission The MS series is the latest in a long line of distinguished Mission active subwoofers. These technologically advanced subwoofers will complement the finnest electronics and decor. Robust bass drivers are used throughout the range. Screw fastening tri-lobe multi-way binding posts feature on all models. Your Mission MSsubwoofers will bring you great listening pleasure for many years.
Page 4
The Mission MS-450 Powered Subwoofers AC INPUT POWER AC 220-240V~50/60Hz 650W FUSE T3.15AL 250V Designed and engineered in the United Kingdom. MS-450SUB AUTO SENSE PHASE CROSSOVER 40Hz 150Hz VOLUME INPUT LFE/R Serial No. Made in China ① Mains Power Indicator ⑥...
Page 5
Connecting the MS-450 Subwoofer A/V Processor Connections Yo ur subwoofe r h a s b e e n d e s i gne d fo r opt i mum performance with a digital processor. If your A/V processor has a line level or LFE subwoofer output you should use this connection.
Page 6
Setting Up Your Subwoofer LOW PASS (CROSSOVER) FILTER: This adjusts the blend between the subwoofer and the main speakers. and enables the system to be set up for optimum bass performance. The higher settings are for use with bookshelf loudspeakers, the lower settings for large floorstanding models. If you choose too low a setting with small speakers, there will be a ‘hole’...
Page 7
Dolby Labs Recommended 7.1 Placement Troubleshooting If your system is not working properly please work through this checklist before returning a unit to your dealer. Symptom Possible Cause No Sound System not switched on; Speaker cables shorting terminals out; Wrong source selected Sound lacks bass content Subwoofer not switched on Bass reproduction indistinct...
Need help?
Do you have a question about the MS-450SUB and is the answer not in the manual?
Questions and answers