Panda Wireless PWRU01 Manual page 21

Internet Setup
This item is used to convert the cable broadband network
to WiFi in order to access the internet via wireless network.
There are three wired network types here: DHCP(default),
PPPoE or Static IP.
Select the desired type and click the icon to enter the
corresponding subpage and set. When completed, Panda
Wireless Express Router will reboot automatically, you can
access internet after about one minute.
✍
Before setup, please connect Panda Wireless Express Router to the Router or Modem with an Ethernet cable
first.
When using DHCP network, you can access internet immediately after plugging the Ethernet cable without
Internet Setup.
When using PPPoE or Static IP network, if you reboot the Router or Modem, you have to reboot the Panda
Wireless Express Router too.
19
<< >>