Important Safety Information - Current Tools 280 Assembly, Operating, Safety And Parts Manual

TABLE OF CONTENTS — 280 Bending Table
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5
Bender Mounting Procedure . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 9
Exploded View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

IMPORTANT SAFETY INFORMATION

Follow ALL safety information
provided by the bender
manufacturer.
• DO NOT operate in wet or damp
locations. DO NOT expose to rain.
• DO NOT operate in an explosive
atmosphere.
• ALWAYS set-up bending table on
a firm, level surface.
• Keep all body parts, hair, loose
clothing, etc. away from rotating
parts and pinch points.
• ALWAYS wear eye protection.
• DO NOT alter the bending table.
* Greenlee ® is a registered trademark of
Greenlee/Textron and Ensley
trademark of Rothenberger Group, which
have no affiliation with Current Tools.
RETAIN SAFETY INFORMATION
This manual should be read and understood by all personnel who
assemble or operate this Bending Table. Failure to understand how to
safely assemble and operate this unit could result in serious injury or
death. This Bending Table should only be operated by qualified personnel.
WARNING
This unit is intended to be used with Greenlee® Model 884,
885, 777, 880 and Ensley® E-125 conduit benders.
Read and understand the bender manufacturer's operating
and
the 280 Bending Table. Failure to do so may result in serious
injury or death.
® is a registered
WARNING
Never allow the carriage with vise to contact the bender,
hand
bending table during a bend.
• All pins, clips, bolts, etc. should be
engaged and rechecked before any
bending has begun.
• When using an electric pump, be sure
to unplug pump before servicing and
when not in use. Also, inspect hoses
and power cords before use.
• Only the operator should be in the
work area.
• Keep the work area clean.
2