Connect the desired audio input device (e.g. wireless microphone, microphone in the lectern, etc.) via the XLR
connector. The devices are immediately ready for use in the system via the DIGIMIC DLine32 Slim UTM and
can be controlled via the control software MicControl or brählerOS.
The input sensitivity of the line level version is preset to approx. 700mV. It can be adjusted internally between
100mV and 1,2V. This adjustment should only be carried out by experienced specialists.
Connector assignment
The DLine32 Slim UTM has the following connector assignment as standard:
Warnings
The connectors of the DIGIMIC DLine32 Slim UTM are only suitable for devices of the DIGIMIC
family. Do not connect any other devices!
In case of faults, contact a technician, do not attempt to repair, unscrew or similar the DLine32
Slim UTM yourself
BRÄHLER Systems GmbH
Auf der Alten Burg 6
53639 Königswinter
Germany
05.0067 200113 V1.0 BRÄHLER Systems is committed to continually improving its products and so reserves the right to make technical modifications without notice.