Summary of Contents for Woxcon IPA-C
- Page 1 User Manual IPA-C Control Box for IPA Series Extender All Rights Reserved Version: IPA-C_2019V1.1...
- Page 2 Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact your distributor for a replacement. § 1x IPA-C Control Box § 1x Power Adaptor (12VDC, 3A) §...
- Page 3 Control Box for IPA Series Extender Introduction The IPA-C is a control box which installed IPA Web Control Server for controlling IPA series extenders by GUI. The web-based GUI is used to configure and control signal extension, routing and switching between IPA transmitter and receiver units.
- Page 4 Control Box for IPA Series Extender System Diagram The following diagram illustrates typical input and output connection that can be utilized with the extender: Installation and Usage This section is for initial installation and usage of the control box. Ensure the control box and all IPA series transmitters and receivers are in the same LAN. There are two ways to connect the control box to the LAN.
- Page 5 Control Box for IPA Series Extender Web Control Server Upgrade The IPA-C control box has installed with Web Control Server before delivery, and you can upgrade the latest version of Web Control Server by following the steps below: Prepare the latest installation files (“xampp” and “windowscygwin32”). Please contact your distributor for them.
Need help?
Do you have a question about the IPA-C and is the answer not in the manual?
Questions and answers