Table of Contents
Advertisement
8
Installing LP Gas Tank
To operate, you will need one precision-filled standard grill LP gas
tank with external valve threads.
W CAUTION: LP gas tank must be properly
disconnected and removed prior to moving this
outdoor fire table.
Inserting LP Gas Tank
W WARNING: Make sure LP gas tank valve is closed.
1.
Open door.
2.
Place precision-filled LP gas tank upright into hole in outdoor fireplace base so the tank
valve is facing the gas line connection.
3.
Secure tank with retention chain.
4.
Close door.
Secure LP Gas Tank
Secure tank by sliding tank retainer chain around the LP gas tank and insert peg into LP gas
tank tray.
Note: Peg must be inserted into LP gas tank when tank is in LP gas tank tray.
LP Gas Outdoor Fire Table
Installing LP Gas Tank (continued)
Connecting LP Gas Tank
20 lb
1.
Make sure the control knob is in the " OFF" position
9 Kg
(Figure 3).
2.
Before connecting, be sure there is no debris caught in the
head of the LP gas tank, head of the regulator valve or in the
12.2 in. / 31 cm
head of the burner or burner ports.
3.
Connect regulator/hose assembly to tank by turning knob
clockwise until it stops.
4.
Perform leak check per "Checking for Leaks" section.
Disconnecting LP Gas Tank
1.
Make sure the control knob is in the " OFF" position
(Figure 3).
2.
Before disconnecting, make sure the LP gas tank valve is
"CLOSED."
3.
Disconnect regulator/hose assembly from LP gas tank by
turning knob counterclockwise until it is loose.
W CAUTION: LP gas tank must be properly
disconnected and removed prior to moving this outdoor fire table.
4.
Place the protective cap cover on the LP tank and store the tank outdoors in a well
ventilated area out of direct sunlight.
Model No. GAD15286G
Advertisement
Table of Contents
