Page 3
ELECTRIC TACKER Original instructions or under the influence of drugs, alcohol or GENERAL POWER TOOLS SAFETY WARNINGS medication. A moment of inattention while operating WARNING!! Read all safety warnings and power tools may result in serious personal injury. all instructions. Failure to follow all instructions listed Use personal protective equipment.
are caused by poorly maintained power tools. NOISE EMISSION f) Keep cutting tools sharp and clean. Properly A-weighted sound pressure level LpA=91.7 dB(A), maintained cutting tools with sharp cutting edges are uncertainty K=3 dB(A) less likely to bind and are easier to control. A-weighted sound power level LwA=102,7 dB(A), g) Use the power tool, accessories and tool bits uncertainty K=3 dB(A)
2. Inspect all screws and tighten if necessary. OPERATION 3. Keep all vents free from dust and dirt STAPLING 4. Clean tool by a dry or damp cloth. NEVER use any 1. Plug stapler into a 220-240V, 50Hz power outlet. solvent.
Page 6
Isaberg Rapid AB. Box 115, SE-330 27 HESTRA, SWEDEN www.rapid.com ESN114/ESN530 Original Instructions...
Need help?
Do you have a question about the Rapid ESN114 and is the answer not in the manual?
Questions and answers