BTECH BS-E14 User Manual

Operation Guide
Charge the battery:
The product has an internal, rechargeable battery; please charge the battery when you use it in the first time. The battery can be
recharged by following ways:
1) By connecting to PC. Make the attached USB cable plug into the computer USB port, then can be recharged.
2) By battery charger. Put the product with USB cable into an Electrical outlet with a USB port, then can be charged.
During charging, the blue indicator will keep light on, when the battery's power is full, it goes off then.
Turn on & Recording:
Press & hold the Power/Record button for about 1 second the blue light goes on, the device will go straight to video recording
first, while the blue light goes off then after few seconds
Standby Mode:
Push once the Power/Record button under recording, the device will back to standby mode while the blue light will keep light on,
push once the Power/Record button again to go back for recording
Turn off:
Press & hold the Power/Record button for about 3 seconds until the blue light goes off while under standby mode
Parameter Setup
Run the "SETUP" program to change the parameters.
User Manual
Power/Record
USB Port
Reset
Lens
LED
Time Adjust
Mic