Page 1
QuickCharge charger, Internet over USB-C, to charge one additional wireless device, and MiFi Share file sharing via mass storage. Test Port Master Reset Hole: Use to reset MiFi 8000 back to original factory settings. Battery Compartment: The battery is pre-installed.
Page 2
Data Usage section shows how much of your monthly data you’ve used and how much The middle of the screen shows you if Wi-Fi is on or off, and how many devices are connected to your MiFi 8000’s left until the next billing cycle.
Page 3
Click on the 2.4 GHz Band Settings or 5 GHz Band Settings link to Settings options. The Wi-Fi page lets you manage your MiFi 8000’s Wi-Fi settings. This page is divided into 3 tabs: ➋ Make your Mode, Channel, and Bandwidth selections from the dr SETTINGS •...
Page 4
Managing Wi-Fi (continued) Primary Network From the Primary Network tab, you can change your Wi-Fi Name (SSID) and Password (Key), select the type of security, and turn Options ON/OFF for your primary network. • To change the Primary Network Wi-Fi Password (SSID) enter the new Wi-Fi name into the field. •...
Page 5
USB File Share USB File Share USB File Share lets you share files and folders with connected devices on the MiFi 8000’s Wi-Fi USB File Share lets you share files and folders with connected devices network when a USB mass storage device is connected to the USB C port.
Need help?
Do you have a question about the MiFi 8000 and is the answer not in the manual?
Questions and answers