Jakka ADVANCED J8 Manual

MANUAL for JAKKA ADVANCED CONTROLLER
KEYPAD and PANEL DESCRIPTION
ON/OFF — On/Off Key
MODE — Mode Key
FAN — Fan Key
▲ ▼ SET
— Increment/Decrement Key
WARNING !!
Parts that need to be considered in the screenshots
are marked with red circle. Please notice the scre-
enshots.
1. ON—OFF OPERATIONS
Use the key to Opening/Closing operations.
When pressing the key once, the device will switch on
or off.
Off Position

2. OPERATION MODE SETTINGS

While the device is in the On Position, operation mo-
de can be changed with
Note: The active mode icon flashes on the panel.
Ventilation Mode
On Position
key.
Cooling Mode
Cooling
Heating
Auto
Setpoint
Room Tmp
Air Quality
Sup. Air Tmp
Out. Air Tmp
Supply Air Fan Speed
Auto-5-4-3-2-1

3. SETPOINT SETTING

Setpoint Setting

4. MONITORING DIFFERENT TEMPERATURES

The sensor values, which is measured by main control-
ler, are displayed alternately on the panel. In this app-
lication "Room Temperature, Supply Air Temperature,
Outdoor Air Temperature" sensors can be measured
by main controller.
Note 1: If Room Temperature Sensor is not connected to
main controller, Temperature Sensor value of the panel is
measured.
Ventilation Electrical Heater Stages
Exhaust Air Fan Speed
1-2-3-4-5-Auto
Main Digits
Alarm Notification
Auxiliary Digits
Heating Mode
Use the ▲ and ▼ keys
to adjust the setpoint. If
the keys are pressed one
time, setpoint will be
changed 1 °C. Use the ▲
key to increase the set-
point, use the ▼ key to
decrease the setpoint.
Setting range: 5 °C—30
°C.
1