Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Com DCD13019
- Page 3 Parts List Item Components Item Components Tools Needed (Not Included) 3/16 in. or 5 mm Safety Hammer Wood Drill Bit Phillips Drill Stud Finder Glasses Screwdriver Note: Wood Double Stud before assembly.
- Page 4 PLEASE CHOOSE BEST INSTALLATION OPTION BASED ON TV BACK PANEL HOLE SPACING: OPTION 1: 2.95 in x 2.95 in / 75 mm x 75 mm or 3.94 in x 3.94 in / 100 mm x 100 mm This mount is designed to be attached into wood Remove TV mounting plate (B) from wall studs.
- Page 5 PLEASE CHOOSE BEST INSTALLATION OPTION BASED ON TV BACK PANEL HOLES SPACING: OPTION 2: (7.87 to 23.6 ) in x 15.7 in / (200 to 600) mm x 400 mm This mount is designed to be attached into wood studs, DO NOT use wall anchors. using a studs.
- Page 6 Figure 1 Slide TV mounts(C) along with TV horizontal bar(D). See Figure 1. Attach Figure 1 to the back of the TV e TV mount(C) and horizontal bar(D) with screws(G) and allen wrench(H). Selecting mounting hardware and then using instructions on page 7. safety screws We strongly recommend two people, one on each side, hold the TV.
- Page 7 TV Wall Mount OPTION 1 OPTION 2 2.95 in x 2.95 in / 75 mm x 75 mm (7.87 to 23.6) in x 15.7 in 3.94 in x 3.94 in / 100 mm x 100 mm (200 to 600) mm x 400 mm TAKE EXTRA CARE AND PAY ATTENTION WHEN YOU FASTEN THE TV MOUNT(S) TO THE BACK TV PANEL IN STEP...
- Page 8 HDMI Cable Information: This Kit includes 1 HDMI™ cable Each HDMI cable measures 6 feet (1828.8 mm) in length. 1.4 Version Supports Ethernet and 3D O.D.: 6.0mm Single molding Distributed by Wal-Mart Stores, Inc., Bentonville, AR 72716...
Need help?
Do you have a question about the DCD13019 and is the answer not in the manual?
Questions and answers
How do I level tv after it is installed on bracket to wall
To level a Com DCD13019 TV after it is installed on a wall bracket:
1. Make sure the wall bracket (A) is level when you install it by using it as a template and marking the holes accurately.
2. During installation, ensure the TV mounts (C) and horizontal bar (D) are centered and level on the back of the TV.
3. When positioning the TV onto the wall bracket, two people should carefully lift and lock the TV in place, making sure it is level before tightening the safety screws.
Proper leveling must be done during the installation steps; no post-installation leveling method is mentioned.
This answer is automatically generated
Dimensions for the screw labled “f”