Summary of Contents for GSS PDP 900
- Page 1 Multiswitch Power Pack PDP 900 CLASS Phone: +49 (0) 911 / 703 8877 Fax: +49 (0) 911 / 703 9210 Grundig SAT Systems GmbH E-mail: info@gss.de Beuthener Strasse 43 Internet: http://www.gss.de D-90471 Nuremberg...
- Page 2 At the end of its service life, please take your device to one of these public collection facilities for proper disposal. Technical description The power pack is only used in conjunction with the cascaded multiswitches of a SAT receiver system to supply power to the connected LNBs. The power supply to the LNBs comes from the SAT-IF inputs of the multiswitch- es. Cascaded multiswitches only need one power pack, which can be fitted to any multiswitch. The SAT-IF inputs and outputs are D.C. coupled. This carries the voltage to all the SAT-IF lines. - 2 - PDP 900...
- Page 3 Assembly • Unscrew the 2 screws at the PDC… . • Connect the DC output (+18V DC OUT) of the power pack to the DC input (+18V DC IN) of the PDC… . +18V DC +18V DC • Screw the power pack tightly with the 2 screws Ventilation openings Power LED Ventilation openings - 3 - PDP 900...
- Page 4 • Tighten 4 screws Specification PDP 900 Mains voltage 100 - 230 V AC, 50/60 Hz Output voltage 18 V DC Max. output current 1000 mA DC Ambient temperature -20°C … +50°C Dimensions (WxHxD) [mm] approx. 70 x 133 x 55 Service: Phone: +49 (0) 911 / 703 2221 • Fax: +49 (0) 911 / 703 2326 • Email: service@gss.de Grundig SAT Systems GmbH • Beuthener Straße 43 • D-90471 Nürnberg Alterations reserved. Technical data E. & O.E. © by GSS GmbH 08062010...
Need help?
Do you have a question about the PDP 900 and is the answer not in the manual?
Questions and answers