J.Burrows JBDRAFFABK Assembly Instructions Manual page 11

Back Tilt
Pull up the lever, located
underneath the right side of the
seat.
Adjust the back to your desired
angle, then push the lever down
to lock the back into position.
Chair Height Adjustment
To increase chair height pull
lever upward while lifting body
weight slightly off the seat.
Release lever at desired height.
To lower chair height sit fully
into the chair and pull lever
upward.
Release lever at desired height.
Care Instructions - Fabric Chairs
Dust and vacuum chair fabric to remove dust and dirt.
Wipe over surfaces with damp cloth rinsed in warm water and mild detergent.
If any stains persist, use a water-based cleaner.
Ensure a spot test is complete first to ensure it does not affect the fabric color.
Do not use harsh detergents, solvents or abrasive cleaners.
Clean, check and tighten all parts regularly.
Care Instructions - PU Chairs
Wipe with a damp cloth & mild soap. Wipe dry immediately with an absorbent drycloth.
Treat spills immediately with an absorbent cloth by blotting the spill.
Do not use detergents, solvents or abrasive cleaners.
Avoid contact with skin, in particular during high temperatures & humidity.
Clean, check & tighten all parts regularly.
Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products, please visit www.officeworks.com.au
11/11