Advertisement
2
Ox
10
R6
11
12
R7
13
Add-on module
K30
X5
+
24 V-DC
ATTENTION: If two photoelectric barriers are used as an anti-entrapment
safeguard, the relay contacts (opening contacts) of the receivers must be
switched in series and connected at terminal J33 on the main board of the
D-PRO Automatic Door Control.
3
Connection for two-way traffi c light
Ox
1
L1
Red
2
external
3
Green
4
Green
internal
5
Red
N
Declaration is in agreement with the following directives: 2006/95/CE (LVD) EN 60335-1:2012, 2004/108/CE (EMC), 2006/42/CE (MRL)
Note: The content of this Declaration of Conformity corresponds to the declaration at the last available version of the document offi cially fi led in the offi ces
of Nice S.P.A. prior to the printing of this manual. This text has been adapted to meet editorial requirements. A copy of the original declaration may be
requested from Nice S.P.A. (TV) I.
Name of manufacturer: NICE S.p.A.
Document: 490/D-PRO AUTOMATIC Rev.01
Address: Via Pezza Alta N°13, 31046 Rustignè di Oderzo (TV) Italy
Product type: Industrial Door Control Nice
Model / Type: Input and Relay Module K30
It is hereby declared that the corresponding technical documentation was created in accordance with Appendix VII A of the directive 2006/42/EC.
For the storage location of the technical documentation, see address.
The undersigned Mauro Sordini, as Chief Executive Offi cer, hereby declares under his own responsibility that the product identifi ed above complies with
the provisions of the following directives:
• 2006/42/EC DIRECTIVE OF THE EUROPEAN PARLIAMENT AND COUNCIL of 17 May 2006, machinery directive.
The following harmonized standard was applied: EN ISO 13849: 2008.
The safety functions: Monitoring of external safety elements (contact x6) Cat 2 PLd, end position monitoring Cat2 PLd,
safety circuit/emergency stop Cat3 PLd.
• 2006/95/EC DIRECTIVE OF THE EUROPEAN PARLIAMENT AND COUNCIL of 12 December 2006, in accordance with the following harmonised stand-
ards: EN 60335-1:2012 (low-voltage directive).
• 2004/108/EC DIRECTIVE OF THE EUROPEAN PARLIAMENT AND COUNCIL of 15 December 2004 in accordance with the following harmonised stand-
ards: EN 61000-6-2:2005, EN 61000-6-3:2007 (EMV directive)
• EC type-examination certifi cate no. 44 205 13 405182 001 NB0044
TÜV NORD CERT GmbH, Langemarckstr. 20, 45141 Essen, Germany
Oderzo, 1 October 2013
Anti-entrapment photoelectric barrier 1 (external)
Transmitter 1
Anti-entrapment photoelectric barrier 2 (internal)
Transmitter 2
-
Main board
of D-PRO Automatic
R3
Red external
R1
Green external
Green internal
R2
Red internal
CE Declaration of Conformity
Receiver 1
Main board of
D-PRO Automatic
Receiver 2
4
Signalling of end positions UP and DOWN
Potential-free 1 up
(display of upper fi nal position)
Potential-free 2 down
(display of lower fi nal position)
Ox
6
R4
7
8
R5
9
Mauro Sordini
(Chief Executive Offi cer)
English – 3
Advertisement
