Advertisement
Assembly/Operating (Continued)
3
1
Plug two ROCKER FRAME TUBES into
MIDDLE FRAME TUBES making sure
the word "OUTSIDE" on the ROCKER
FRAME TUBES is facing outward and
buttons are clicked in securely.
Changing between stationary and rocking mode:
Note: Make sure the baby is NOT in the bassinet when switching between
stationary and rocking mode.
1
Push button on each ROCKER FRAME next to the word OUTSIDE and rotate
ROCKER FRAME TUBE upward to be in stationary (non-rocking) mode.
2
4
2
Turn assembled BASSINET over and
place BOARD (with hinge side facing
down) and MATTRESS with SHEET
Push button on each ROCKER FRAME
next to the word OUTSIDE and rotate
ROCKER FRAME TUBE inward to go
inside the BASSINET
back to rocker mode.
3
Advertisement
