Advertisement
2" Swing Binder Installation
using your Sailrite binder at
C
F
A
1. Attach the binder to the sewing machine by inserting the two screws with the
D
washer
through the binder slot
two holes in the bed of the machine G. Screw placement in the binder slot will
vary from machine to machine.
Watch video tutorials on installing &
B
D
G
#102582
Sailrite.com
E
C
(not the 3 holes above the slot) into the
A
feeder mouth
feeder ledge
B
binder slot
C
screws & washer
D
E
thumb screw
F
spring end
Advertisement
Table of Contents
Related Manuals for Sailrite 102582
Summary of Contents for Sailrite 102582
- Page 1 2" Swing Binder Installation #102582 Watch video tutorials on installing & Sailrite.com using your Sailrite binder at feeder mouth feeder ledge binder slot screws & washer thumb screw spring end 1. Attach the binder to the sewing machine by inserting the two screws with the...
- Page 2 2. Adjust the feeder mouth from front to back using the two screws next to the feeder mouth. Position the binder as close as possible to the front of the presser foot without touching the foot or feed dog H. The binder should not come into contact with the foot or the feed dog when sewing.
Need help?
Do you have a question about the 102582 and is the answer not in the manual?
Questions and answers