Royal-model DG-300 Building Instructions

Congratulations! You have just bought the model plane which is a semi-replica of
a real glider being manufactured in Germany. The model is designed to be used by
advanced modelers, mainly for the on-slope flights, but you'll certainly appreciate
its good flight performances in the conditions of thermals too. The model can also
be fitted with a hook to be pulled behind a motor aircraft.
Kit includes:
White gel-coated fiberglass fuselage, fiberglass rudder, balsa elevator, foam/abachi two-piece
wings covered with foil, double-high airbrakes installed, canopy frame, clear canopy, hardware,
instruction
To finish the model you need:
* cyanoacrylate adhesive
* 5-min epoxy glue
* common modeller's tools (sharp knife, drilling machine, screwdriver, fine round
file,sandpaper)
To fly you need:
* 4 channel RC set and 6 servos
CAUTION! You are responsible for running this model. A damage to property or health might
arise by improper use of this product. This is why you have to keep a safe distance from the
buildings and other developed areas when flying. Make sure that you are the only one who is
Flying on the same waveband.
The product may only be used by the children over 14, supervised by adults.
¼ Semi-scale sailplane
DG-300
Building instructions
3750 mm
1720 mm
2
67 dm
royal- - - - model royal model
royal royal model model
4000 g (empty)
HQ 2,5/14
A, E, R, B