Advertisement
!
WARNINGS:
• Adult supervision is required.
• Please use with caution, as this product requires skill to
operate safely to avoid falls, collisions, and injuries to
yourself and others.
• Protective equipment should be worn. Use helmet, wrist
guards, kneepads and elbow pads.
• Always wear shoes.
• Not for children with a body weight of more than 50 kg
(110 lb).
• Never allow more than 1 rider.
• Not recommended for children under 5 years of age.
• Learn to stop safely.
• Never ride at night.
• Use caution and common sense when riding.
ASSEMBLY ISSUES:
CAUTION: Pay close attention that all locking
devices are engaged. Periodically check to ensure
all wheel fasteners, folding mechanisms, and quick
release clamps are secure and in good working
order.
• Adults must assist children in the initial adjustment
procedures to unfold and fold the scooter and adjust
the handlebar and steering to height.
• Check and secure all fasteners before every ride.
• Adjust all nuts as shown to ensure tightness.
• Replace worn or broken parts immediately.
• Do not lubricate the main steering bushing assembly.
• Make no modifications other than what is included in
the manufacturers instructions.
WHERE/WHEN TO RIDE:
• Check and obey local laws regarding use on public
property.
• Obey all local traffic and scooter riding laws and
regulations.
• Watch out for pedestrians.
• Ride on smooth paved surfaces away from motor
vehicles.
• Avoid sharp bumps, drainage grates, and other sudden
surface changes, as the scooter may suddenly stop.
• Avoid streets and surfaces with water, sand, gravel, dirt,
leaves, and other debris. Wet weather impairs traction,
braking and visibility.
• Avoid excess speed associated with downhill rides.
• To prevent injury, keep away from cars, streets, steep
inclines, steps, swimming pools and other bodies of
water.
GEAR UP:
• Always wear shoes.
• Your child must always wear a bicycle helmet when
using this product. Helmets reduce the energy of some
impacts, minimizing or preventing head injuries. Make
sure your child's helmet has a label stating/certifying
conformance with the applicable certifying agency which
includes the intended age requirement for use with a
child.
• For maximum protection during an impact, the helmet
must be properly secured to your child's head. The
helmet must have a strap that goes under the chin with a
buckle that stays securely fastened. The helmet should be
worn level/low on the forehead, not tilted back. The
chinstrap should be adjusted so there is no slack and it is
firmly buckled (see helmet instructions). After securing
the helmet to your child's head, test to be sure that the
strap stays tight, the buckle remains secure and the
helmet cannot be removed from your child's head by
twisting or pulling the helmet. Remind your child to
remove the helmet when playing on any kind of
playground equipment or any place where the helmet
may present a risk of strangulation.
• If the helmet is involved in a crash, replace it or have it
examined by the manufacturer before reuse.
BRAKING:
• To slow down or stop, Apply pressure to foot brake
gently at first, then apply more pressure until the scooter
comes to a stop.
• Brake will get hot from continuous use. Do not touch
after braking.
BATTERY
INSTALLATION/REPLACEMENT
• Unscrew the top from the right handle. Insert 2 "AAA"
(LR03) alkaline batteries into the handle in the orientation
shown. For best performance, use only alkaline batteries.
• When the handle no longer makes sounds, replace the
batteries.
1
2
Battery Safety Information
In exceptional circumstances batteries may leak fluids that can cause a chemical burn
injury or ruin your toy (product). To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the product before being charged (if
designed to be removable).
• Rechargeable batteries are only to be charged under adult supervision (if designed to be
removable).
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Dispose of battery(ies) safely.
• Do not dispose of this product in a fire. The batteries inside may explode or leak.
FOR TALKING BILLBOARD BUTTON CELL BATTERIES:
RECYCLE INFORMATION (USA ONLY)
Please recycle button cell batteries contained in this product by:
• Visiting your nearest recycling center. For location of the nearest recycling
center visit us online at www.service.mattel.com.
• If a recycling center is not available in your area, contact us for a pre-paid
mailing label. Visit us online at www.service.mattel.com or call toll-free at
1-800-524-TOYS.
Valid in the US only. • Solo válido en los EE.UU. • Valable aux États-Unis
seulement.
INSTRUCTION SHEET
SPECIFICATIONS
2-IN-1 RIDE ON
Toy:
J2357
Toy No.:
0920
Part No.:
15.75" W x 11" H
Trim Size:
5.5" W x 8.5" H
Folded Size:
3 PANEL
Type of Fold:
2
# colors:
Black + PMS300
Colors:
White Offset
Paper Stock:
70 lb.
Paper Weight:
005
EDM No.:
Advertisement
