Conquer 400-STFLD Instructions

Pro portable mechanic bike repair stand bicycle workstand

Instructions for the Conquer PRO Portable Mechanic Bike Repair Stand

A. Bicycle clamp

B. Extension tube

C. Tool tray

D. Supporting tube

E. 2 Legs

F. Front wheel stabilizer

Carefully read the following instructions and understand your repair stand prior to use.

Use this stand only as described in this manual. Please keep these instructions safe

and nearby the stand. Always refer to the documentation for any

unsure of use, contact Conquer.

The stand can only be operated on a level surface and is only intended to be used as a

bicycle repair stand. The load can be no greater than 50 lbs.

Technical specifications:

Maximum load: 50 lbs

The clamp will hold tubes from 30mm to 70mm

EMAIL:

customercare@conquerequipment.com

Product name: PRO Portable Mechanic Bike

Repair Stand Bicycle Workstand

SKU: 400-STFLD

EMAIL:

TEL: 855-349-4327

help.conquerequipment.com

Bicycle Workstand

WEB: help.conquerequipment.com

customercare@conquerequipment.com

questions.

TEL: 855-349-4327

If you are

Table of Contents

Do you have a question about the 400-STFLD and is the answer not in the manual?

Page 1 Product name: PRO Portable Mechanic Bike Repair Stand Bicycle Workstand SKU: 400-STFLD EMAIL: customercare@conquerequipment.com TEL: 855-349-4327 help.conquerequipment.com Instructions for the Conquer PRO Portable Mechanic Bike Repair Stand Bicycle Workstand A. Bicycle clamp B. Extension tube C. Tool tray D. Supporting tube E. 2 Legs F.
Page 2 Product name: PRO Portable Mechanic Bike Repair Stand Bicycle Workstand SKU: 400-STFLD EMAIL: customercare@conquerequipment.com TEL: 855-349-4327 help.conquerequipment.com Overview Ensure the repair stand is on a flat and level surface prior to use. 1. Do not exceed the maximum extension of the bike mounting tube (B).
Page 3 Product name: PRO Portable Mechanic Bike Repair Stand Bicycle Workstand SKU: 400-STFLD EMAIL: customercare@conquerequipment.com TEL: 855-349-4327 help.conquerequipment.com To adjust the height, loosen and tighten the quick release (c) between the supporting tube and the extension tube (see fig 3-1) Slide leg brackets (d) for the legs (E) to fold or unfold the stand. (see fig 3-1 and fig 3-2).
Page 4 Product name: PRO Portable Mechanic Bike Repair Stand Bicycle Workstand SKU: 400-STFLD EMAIL: customercare@conquerequipment.com TEL: 855-349-4327 help.conquerequipment.com AVOID INJURY! Carefully read the instructions before use. Follow the steps provided to avoid injury or damage to your bicycle. Warning  Do not exceed the maximum load of 50 lbs! Exceeding the maximum load risks injury and the damage to bicycle.