Download Print this page

AV/VC One AVS/021/SLF1 Installation Instructions

Shelf kit

P A R T S I N C L U D E D :

W A R N I N G

AV S - 0 2 1 - S L F 1 - I N S T - A - M AY 2 0 1 6

Installation Instructions for

AV/VC One Shelf Kit

AV S / 0 2 1 / S L F 1

A V S / 0 2 1 / S L F 1

Shelf

bracket LH

bracket RH

E L E C T R I C A L S A F E T Y

•

Safe installation of electrical equipment is the responsibility of the installer.

•

Colebrook Bosson Saunders recommends that only double-insulated

electrical equipment and cables are installed in AV/VC One unit.

M A I N T E N A N C E A N D I N S P E C T I O N

•

Ensure all screws and fixings are fully tightened and occasionally re-tighten if necessary.

•

Clean with a dampcloth. DO NOT use solvents.

D I S C L A I M E R

As part of Colebrook Bosson Saunders ongoing product improvement

programme, the design of products may change without prior notice and

details may vary from those illustrated.

REFER ALSO TO MAIN

INSTRUCTIONS FOR AV/VC

ONE STAND INSTALLATION

Fixing screw

Table of Contents

Need help?

Do you have a question about the AVS/021/SLF1 and is the answer not in the manual?

Page 1 Colebrook Bosson Saunders recommends that only double-insulated electrical equipment and cables are installed in AV/VC One unit. M A I N T E N A N C E A N D I N S P E C T I O N •...
Page 2 If required adjust spacing of shelf brackets to ensure correct fit into slots on AV/VC One Column Mount shelf to AV/VC One Column Choose preferred height according to equipment to be mounted 2 . 1 2 . 2 2 .