Download Print this page

Advanced ICE 1319-1 Manual

Holden, chevrolet & gmc caravan/trailer camera system

Advertisement

Quick Links

Holden, Chevrolet & GMC
Caravan/Trailer Camera System
PLEASE READ BEFORE BEGINNING INSTALLATION
Installation Terms & Conditions
• If this Installation requires opening the factory monitor or radio to insert ribbon cables or sub boards, Advanced
ICE Pty Ltd advises that the installation be carried out by an installer with experience working with electronic circuit
boards. Advanced ICE highly recommends the use of a suitable workbench with Antistatic Mat and Earth Strap to
avoid possible damage from a static charge. Advanced ICE Pty Ltd does not accept any responsibility for damaged
caused either to the components in the vehicle or the product, so please do not proceed with the installation if you
do not accept these terms.
• All labels on the product including software versions and serial numbers must not be covered, damaged or removed.
This may void the warranty on the product.
• Ensure that all left over accessories, including remote controls and cables, are given to the customer. If replacements
are required in the future they will be charged.
• Please ensure the installation of this product will not interfere with any factory safety equipment (e.g. Airbags)
• If working with Airbags, be sure to disconnect the vehicle Battery before beginning work. This product and the
following instructions are designed for installation by a qualified 12v installer, car audio installer or auto electrician.
• Interfaces and Navigation modules must not be installed in a location where they will be exposed to extreme
temperatures including, but not limited to, installation on top of a vehicles radio, transmission tunnel or firewall.
Damaged caused by exposure to heat is not covered under warranty.
• If a navigation product is being installed, the end user will need access to the SD Card so as to perform navigation
software updates. Please ensure the navigation module is installed in an easy to access location.
• If the Navigation SD card is not easily accessible by the end user, you the seller, will be responsible for any labour to
assist the customer to access the SD card to perform navigation updates.
Overview
This GM Caravan/Trailer Camera System is designed for 2015 on Chevrolet Silverado (MyLink), GMC Sierra (Intellilink)
or Cadillac Escalade (My CUE) systems that have an 8 Inch Touch screen. It integrates a Caravan/Trailer Camera into
the factory screen and includes the functionality to view the Caravan/Trailer Camera automatically when reverse gear
is engaged.
Important Product Information
This manual is a guide to installing the Caravan/Trailer Camera System.
• This product comes with a 2 year warranty against manufacturer related defects
• Please Note: This system is only compatible with NTSC Cameras. So for all additional cameras (E.G. Caravan/Trailer)
ensure you only use an NTSC camera.
Page 1
1319-1_INS_V1.0

Advertisement

loading

Summary of Contents for Advanced ICE 1319-1

  • Page 1 ICE Pty Ltd advises that the installation be carried out by an installer with experience working with electronic circuit boards. Advanced ICE highly recommends the use of a suitable workbench with Antistatic Mat and Earth Strap to avoid possible damage from a static charge. Advanced ICE Pty Ltd does not accept any responsibility for damaged caused either to the components in the vehicle or the product, so please do not proceed with the installation if you do not accept these terms.
  • Page 2: Interface Connectors

    Complete Kit Contents LVDS Input Power/CAN Harness GM-LVDS Interface LVDS Output Cadillac Harness Chevy/GMC Harness IR Harness 1303 - V2P-II 1305 - VSW WA7058 OSD Menu Remote RCA Y Adapter NTV-HAR300 NTV-HAR283 Interface Connectors Not Used Not Used Not Used LVDS OUT LVDS IN Power / CAN...
  • Page 3: Installation Process

    Before You Begin... The following only applies to 2017+ vehicles equipped with an OEM rear camera. • In some compatible 2017+ vehicles, the system is equipped with an additional module called the “HMI Bypass Module” which routes LVDS and camera images to the screen from the HMI. If equipped, the module is normally located directly beneath the BCM (driver’s side under dash).
  • Page 4: Mode Change & Operation

    For Cadillac Escalade 1. Refer to the first page of the NAV TV Instructions and use the Cadillac Harness for plug and play power and CAN-Bus. 2. Set dipswitch 8 Down as per the instructions on page 3 of the Nav TV instructions. Mode Change &...
  • Page 5 Caravan/Trailer Installation Schematic #1 HMI Module Power Harness connected to the GMC Harness Disconnect factory Cable and connect here Factory Cable Plug After disconnecting the factory cable, connect this plug into its place Connect to the AUX/Front RCA of the Power Harness Connected to Caravan Camera NTV-HAR283...
  • Page 6 Caravan/Trailer Installation Schematic #2 Power Harness connected to the GMC Harness Cut factory camera Camera video signal Connect to the AUX/Front (grey/yellow wire) wires and join as RCA of the Power Harness shown HMI Bypass Module Camera video ground Connected to Caravan (white/blue wire) Camera swap...
  • Page 7: Faq And Troubleshooting

    FAQ and Troubleshooting Q - When I install the Multimedia interface, there is no factory picture or aftermarket picture. A. First check that the multimedia interface is receiving power and has an internal LED on. Also confirm that dipswitch 10 is in the down position. If these are working as normal try the following. B.