Advertisement
Quick Links
Ettus USRP E300 Embedded Family Getting Started Guides
Contents
•
1 Kit Contents
1.1 E310
♦
1.2 E312
♦
1.3 E313
♦
2 Verify the Contents of Your Kit
•
3 You Will Need
•
4 Proper Care and Handling
•
5 Install and Setup the Software Tools on Your Host Computer
•
•
6 Powering On the Hardware
•
7 Turning the Device Off/On
8 Serial Console Connectivity
•
9 Network Connectivity
•
10 Logging In
•
11 Subdevice Specification Mapping
•
11.1 E310/E312/E313
♦
◊
◊
•
12 Example Programs
•
13 Test and Verify the Operation of the USRP
14 Battery (E312 Only)
•
15 Battery Calibration Procedure
•
16 Battery Safety Information
•
16.1 Handling
♦
16.2 Charge and Discharge
♦
16.3 Storage
♦
♦
16.4 Disposal
•
17 Technical Support and Community Knowledge Base
18 Legal Considerations
•
19 Sales and Ordering Support
•
20 Terms and Conditions of Sale
•
E310 USRP
•
Power supply
•
2x SMB-to-SMA
•
adapter
1 Gigabit
•
Ethernet cable
USB2-to-microUSB
•
cable
•
Imaged
microSD card
Getting started
•
guide
•
E312 USRP
Power supply
•
2x SMB-to-SMA
•
adapter
1 Gigabit
•
Ethernet cable
USB2-to-microUSB
•
cable
•
Imaged
microSD card
Getting started
•
guide
11.1.1 UHD <3.15.x.x
11.1.2 UHD 3.15.x.x+
Advertisement
Summary of Contents for Ettus Research USRP E300 Embedded Series
- Page 1 Ettus USRP E300 Embedded Family Getting Started Guides Contents • 1 Kit Contents 1.1 E310 ♦ 1.2 E312 ♦ 1.3 E313 ♦ 2 Verify the Contents of Your Kit • 3 You Will Need • 4 Proper Care and Handling •...
- Page 2 The USRP E313 is a fully assembled device that includes an USRP E310. Make sure that your kit contains all the items listed above. If any items are missing, please contact your sales agent or Ettus Research Technical support immediately.
- Page 3 If the hostname does not resolve, you can discover the IP address by logging into the device over the serial connection, or checking your network?s DHCP tables. Once you have logged in to the device, you can reconfigure the network settings (e.g., you could configure it for a static IP address, if you wish). When you first log in to the device, the user is ?root? and the password is empty (no password).
- Page 4 If the power button status LED indicates a ?Low Voltage Error? (codes 1, 2, 3, 4, 5, 6, 7) or a ?Battery Low Error? (code 10), plug the USRP E312 into an AC power source as soon as possible to recharge the battery. When the power button status LED indicates at ?Temperature Error? or ?Charger Error? (codes 8, 9, 11, or 12), power off the USRP E312 unit and allow it to cool down to room temperature.
Need help?
Do you have a question about the USRP E300 Embedded Series and is the answer not in the manual?
Questions and answers