Allcam LCD201 Installation Instruction

Installation Instruction

UNPACKING INSTRUCTIONS

Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage.
Check package contents against the Supplied Parts List in the next page to assure that all components were received
undamaged. Do not use damaged or defective parts.
Carefully read all instructions before attempting installation.

IMPORTANT SAFETY INFORMATION

Install and operate this device with care. Please read this instruction before beginning the installation, and carefully follow all
instructions contained herein. Use proper safety equipment during installation.
Please call a quali ed installation contractor for help if you:
If you don't understand these directions or have any doubts about the safety of the installation.
If you are uncertain about the nature of your wall, consult a quali ed installation contractor.
Do not use this product for any purpose or in any con guration not explicitly speci ed in this instruction. We hereby disclaim
any and all liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product.
!


Tools Required


The mounting components and hardware supplied in this package are not designed for installations to walls with steel studs or to
cinder block walls. If the hardware you need for your installation is not included, please consult your local hardware store for proper mounting
hardware for the application.
            
           
 
  
 

  
 
1
English
 