Advertisement
HYDRAULIC MANHOLE
COVER LIFTER
INSTRUCTIONS
1. Assemble Manhole Cover Lifter.
2. Clean out the keyholes of the manhole cover.
3. Fix keys into position and wheel lifter into place.
4. Pump cylinder to raise manhole cover.
5. Once cover is clear of the ground pull the lifter to move the cover.
6. To lower the cover release the cylinder valve.
ALWAYS WEAR PROTECTIVE FOOTWARE
THIS TOOL HAS A SAFE WORKING LOAD OF 1.5 TONS
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Monument 1043J
- Page 1 HYDRAULIC MANHOLE COVER LIFTER INSTRUCTIONS 1. Assemble Manhole Cover Lifter. 2. Clean out the keyholes of the manhole cover. 3. Fix keys into position and wheel lifter into place. 4. Pump cylinder to raise manhole cover. 5. Once cover is clear of the ground pull the lifter to move the cover. 6.
- Page 2 ASSEMBLY INSTRUCTIONS Slide the beam through the body Slide lifting hooks on either side. Ensure hooks face towards the back wheel Attach wheels and handle Fit keys into cover and move lifter into position Pump jack handle to lift cover Pull lifter to remove cover...
- Page 3 EXTRA INSTRUCTIONS 1. WEAR PROTECTIVE FOOTWARE 2. ENSURE HOOKS ARE ATTACHED FACING THE CORRECT DIRECTION 3. IF COVER IS STUCK HIT ARROUND ITS EDGE TO BREAK THE SEAL. IF THIS DOES NOT WORK USE A SEAL BREAKER. DO NOT CONTINUE TO PUMP CYLINDER AS THE LIFTING BEAM WILL BEND...
Need help?
Do you have a question about the 1043J and is the answer not in the manual?
Questions and answers